Manual Bosch tds 1606 (page 12 of 114) (English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Turkish, Spanish, Norwegian, Finnish)

324038

Zoom out

Zoom in

1/114

• Do not allow the power cable to come into

contact with the soleplate when it is hot.

• Never aim the steam at people or animals.

Description

1. Boiler´s cap

2. Removable iron pad

3. Mains cable and hose storage compartment

4. Mains cable

5. Steam hose

6. “Steam ready” pilot light

7. “Refill boiler” pilot light

8. Variable steam control (*depending on the

model)

9. Illuminated main power button (0/I)

10. Housing with internal steam generator

11. Temperature control knob

12. Steam release button

13. Iron pilot light

14. Soleplate

15. Steam button lock (*depending on the

model)

16. Filling funnel

17. Carrying handles

Preparations (A)

1. Remove any label or protective covering from

the soleplate.

2. Place the appliance horizontally on a solid,

stable surface. You may remove the iron pad

(2) from the appliance and place the iron on

it on another solid, stable, horizontal surface.

Never rest the iron on the appliance without

the iron pad!

3. Open the boiler´s cap (1). Fill the boiler carefully

using always the funnel, and close the cap

firmly.

Filling with warm water reduces the waiting

time for heating up.

Do not overfill the boiler.

4. Unwind the mains cable (4) fully and plug it

into an earthed socket.

5. Switch the main power button (9) on (position

“I”)

6. The “Steam ready” indicator lamp (6) will light

up after approximately 7 minutes, indicating

that the appliance is ready to use.

7. This appliance has a water level sensor. The

“Refill boiler” indicator (7) will light when the

boiler is empty.

Refilling the boiler

Attention! Risk of burns!

Be careful when opening the cap, steam

may escape.

If the pilot lamp (7) illuminates :

1. Press the steam button (12) to check that no

more steam is generated. Only then the boiler

should be refilled.

2. Set the appliance switch (9) to the off position

(“0”) and unplug the steam station from the

mains. Then wait for minimal 2 minutes.

3. Open the cap (1) carefully and slowly. Allow

remaining steam to escape.

4. Refill the boiler using always the funnel. Do

not overfill the boiler.

5. If there is water left around the filling inlet,

please dry with a towel before closing the

boiler.

6. Close the cap firmly.

Important:

• Normal tap water can be used.

To prolong the optimum steam function, mix

tap water with distilled water 1:1. If the tap

water in your district is very hard, mix tap

water with distilled water 1:2.

You can inquire about the water hardness

with your local water supplier.

• To avoid damage and/or contamination of the

boiler, do not use perfumed water, vinegar,

starch, descaling agents, additives or any

other type of chemical product.

Any damage caused by the use of the

aforementioned products, will make the

guarantee void.

• The iron is not designed to rest on its heal.

Please always position it horizontally on the

iron pad (2). The iron pad can be placed into

the specially designed recess on the appliance

or somewhere suitable alongside the ironing

area.

Never rest the iron on the appliance

without the iron pad!.

• During it first use the iron may produce certain

vapours and odours, along with white particles

on the soleplate, this is normal and it will stop

after a few minutes

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Bosch tds 1606 in the language / languages: English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Turkish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 2,43 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Bosch tds 1606 Manual

Product: