Manual Bosch TDA3028210 - Sensixx x DA30 (page 16 of 130) (All languages)

620124

Zoom out

Zoom in

1/130

B O S C H

* Model dependent

ENGLISH

Tips to help you save energy

Steam production consumes the most energy. To

help minimise the energy used, follow the advice

below:

1. Start by ironing the fabrics that require

the lowest ironing temperature. Check the

recommended ironing temperature in the label

on the garment.

2. Regulate the steam according to the selected

ironing temperature, following the instructions

in this manual.

3 Only use steam if necessary. If possible, use

the spray function instead.

Try to iron the fabrics while they are still damp

and reduce the steam setting. Steam will be

generated from the fabrics rather than the

iron.

If you tumble dry your fabrics before ironing

them, set the tumble drier on the ‘iron dry’

program.

4. If the fabrics are damp enough, turn off the

steam regulator (3) completely.

5. Stand the iron upright during pauses. Resting

it horizontally with the steam regulator on

generates wasted steam.

Cleaning & Maintenance



See the leaet sides

Attention! Risk of burns!

Always unplug the appliance from the

mains supply before carrying out any

cleaning or maintenance operation on it.

1. If the iron is only slightly soiled, pull out the

plug and allow the soleplate (7) to cool down.

Wipe the housing and the soleplate with a

damp cotton cloth only.

2. If the cloth is synthetic, it may melt due to the

high temperature on the soleplate, switch off

the steam and rub off any residue immediately

with a thickly folded, dry cotton cloth.

3. To keep the soleplate smooth, you should

avoid hard contact with metal objects. Never

use a scouring pad, or chemicals to clean the

soleplate.

AntiCalc

Multiple descaling system



See the leaet sides

A self-clean

Each time you use the steam regulator (3), the

“self-clean” system cleans the mechanism of

scale deposits.

B Calc’nClean

The “Calc’nClean” function helps to remove

scale particles out of the steam chamber. Use

this function approximately every 2 weeks if the

water in your area is very hard.

Unplug the iron from the mains socket, set

the steam regulator (3) to the

[ ] position

and ll the water tank (11) with water.

Set the temperature control (12) to the “max”

position and plug in the iron.

After the necessary warm-up period, the lamp

goes out. Then, unplug the iron (very

important!).

Set steam regulator to the “max” position.

Hold the iron over a sink. Press the “clean”

button (10) and shake the iron until

approximately one third of the water capacity

of the tank is evaporated. Boiling water and

steam will come out, carrying scale or

deposits that might be there.

Release the “clean” button, and gently shake

the iron for some seconds.

Repeat the steps 5 and 6 three times until the

tank is empty.

Then plug the iron in and heat it up again until

the remaining water has evaporated.

Unplug the iron and let the soleplate (7) cool

down. Wipe the soleplate with a damp cotton

cloth only.

C anti-calc

The “anti-calc” cartridge has been designed to

reduce the build-up of scale produced during

steam ironing, helping to extend the useful life of

your iron. Nevertheless the “anti-calc” cartridge

cannot remove all of the scale that is produced

naturally over time.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Bosch TDA3028210 - Sensixx x DA30 in the language / languages: All languages as an attachment in your email.

The manual is 4,39 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Bosch TDA3028210 - Sensixx x DA30 Manual

Product: