Manual Bosch tca 7301 vero professional 300 (page 35 of 132) (English, German, Dutch, French, Italian, Portuguese, Spanish)

362550

Zoom out

Zoom in

1/132

deen

j 3 sec. + >

AUTO OFF AFTER

Turn the knob 6 to enter the time span

after which the appliance should

automatically switch to “energy saving

mode” following drink preparation.

A time between 5 minutes and 8 hours can

be set.

j 3 sec. + >

WATER FILTER

Before a new water ﬁlter is used, it must be

rinsed.

To do this, press the water ﬁlter ﬁrmly into

the water tank 11 with the aid of the

measuring spoon 14. Fill the water tank

with water up to the “max” mark.

Turn the knob 6 to select

START and

press the

start

button 8.

● PLACE 0.5 L CONTAINER UNDER MILK

FROTHER



START

Place a container with a capacity of 0.5

litres under the milk frother 10.

Press the

start

button 8. Water will now

ﬂow through the ﬁlter to rinse it.

Next, empty the container. The appliance

is ready to use once more.

Note: Rinsing the ﬁlter simultaneously

activates the setting for the “change ﬁlter”

display.

You can ﬁnd detailed information about the

water ﬁlter in the enclosed ﬁlter instructions.

●

The ﬁlter is no longer effective when the

CHANGE FILTER display appears, or at the

latest after 2 months. It needs to be

replaced for reasons of hygiene and so that

there is no build-up of limescale (this could

damage the appliance).

Replacement ﬁlters can be obtained from

retailers (TCZ7003) or from customer

service (

467873).

If no new ﬁlter is used, turn the

WATER

FILTER setting to NO.

Note: If the appliance has not been used

for a prolonged period (e.g. vacation) the

ﬁlter should be rinsed before the appliance

is used again. To do this, simply dispense a

cup of hot water.

j 3 sec. + >

CONTRAST

The display contrast can be set from –20

to +20. The factory setting is +0.

Enter the required setting with the knob 6.

j 3 sec. + >

FACTORY SETTINGS

You can cancel your own settings and

reactivate the factory settings.

To activate the factory settings, press the

start

button 8.

Note: The appliance can also be reset to

the factory settings using a combination of

buttons. The appliance must be switched off

fully.

Hold down the

< and > buttons 4 and

the on/off switch 1 O / I at the same time

for at least 5 seconds. Press the

start

button 8. The factory settings are now

reactivated.

●

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Bosch tca 7301 vero professional 300 in the language / languages: English, German, Dutch, French, Italian, Portuguese, Spanish as an attachment in your email.

The manual is 4,45 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Bosch tca 7301 vero professional 300 Manual

Product: