746487
34
Zoom out
Zoom in
Previous page
1/72
Next page
en Troubleshooting
34
Fault Cause troubleshooting
Water is dripping from the
brewing unit. T DISC is damaged, leaking
or not correctly pierced.
Use a new TDISC.
Only use T DISCs once.
1. Wait until the brewing process has
come to an end and the appliance
has cooled down.
2. Remove the T DISC.
3. Clean the brewing unit.
→"Cleaning the appliance",
Page31
The piercing unit is not inser-
ted correctly.
Press the piercing unit into the
holder using both thumbs until it
clicks audibly into place.
There is water under the cup
stand. Condensation has formed
due to technical reasons.
Remove excess water with a soft
cloth.
Information on display panel
Fault Cause troubleshooting
No LED is lit. Appliance is in idle mode. Press .
All LEDs flashing. Voltage in the house system
is incorrect. 1. Pull out the mains plug and re-insert
it.
2. If the problem persists for a longer
period, have the voltage of your
property checked by an electrician.
LED lights up. Water tank has not been suf-
ficiently filled. 1. Fill the water tank with fresh, cold
water up to the mark ⁠.
2. Insert the water tank.
LED lights up even
though there is enough wa-
ter in the water tank.
Float is stuck in the water
tank. 1. Descale the appliance.
→"Descale the appliance",
Page31
2. Reach into the water tank and
move the float up and down.
Water tank is wrongly inser-
ted. 1. Insert the water tank correctly.
2. Push the water tank into the appli-
ance until it clicks into place.
LED lights up. Build-up of limescale in the
appliance.
Descale the appliance.
→"Descale the appliance",
Page31
34


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Bosch TAS1102 Style at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Bosch TAS1102 Style in the language / languages: Italian as an attachment in your email.

The manual is 7,73 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Bosch TAS1102 Style

Bosch TAS1102 Style User Manual - English, German, Danish, French, Polish, Swedish, Spanish, Norwegian - 200 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info