Operating the appliance en
31
extraDry
The final rinse uses a higher
temperature which improves the drying
result. The running time may increase
slightly. (Caution if utensils are delicate!)
You can switch the extraDry function on
or off.
Eco forecast
When Eco forecast is activated, the
average water and energy consumption
of the selected programme is briefly
displayed on the display window at the
top @.
AutoPowerOff (Switching off
automatically after the end of
the programme)
Auto Power Off
To save energy, the dishwasher
is switched off 1 minute after
the programme ends. You can also
change this setting.
Possible settings are:
■ off: The appliance does not switch
off automatically.
■ After one minute: The appliance
switches off after 1 minute.
■ After two hours: The appliance
switches off after 2 hours.
emotionLight (interior light) *
emotionLight
* depending on the features of your
dishwasher
The interior light 1" comes on when
the door is opened irrespective of
whether the ON/OFF switch ( is
switched on or off. When the door is
closed the light is off. You can switch
the interior light on or off.
Note: Note that when the door is open
the interior light is automatically
switched off after 1 hour.
Front display *
Front display
* depending on the features of your
dishwasher
You can switch the front display ): on
or off (additional programme
information).
TimeLight
(Optical display while the
programme is running) *
timeLight
* depending on the features of your
dishwasher
While programme is running, an optical
display (additional programme
information) is indicated on the floor
under the appliance door. If the base
panel is pulled forwards or if the
appliance is installed at eye-level with
flush furniture front, the display is not
visible.
You can switch the optical display on or
off.
Infolight *
infoLight
* depending on the features of your
dishwasher
While the programme is running, a light
spot shines on the floor under
the appliance door. Do not open the
appliance door until the light point is no
longer visible on the floor. If the
appliance door is not completely
closed, the light spot flashes *. If
the appliance is installed at eye-level,
with flush furniture front, the light point
is not visible. You can switch the
Infolight on or off.
Changing start programme
You can change the “Start programme”
setting.