Manual Bosch SmartphoneHub CUI100 - 2021 (page 17 of 122) (English, German, Dutch, Danish, French, Italian, Portuguese, Swedish, Spanish, Norwegian, Finnish)

780179

Zoom out

Zoom in

1/122

English – 3

Inserting a smartphone into the universal holder

(seefiguresAandB)

A universal holder(16) is supplied for attaching a smart-

phone. Specific holders for iPhones can be purchased from

the range of accessories. No separate power supply is ne-

cessary for an iPhone holder.

For the universal holder, the power (5V/1A, max.1.5A) is

supplied using a separate USB cable (included with delivery)

via the micro‑A/B USB port of the SmartphoneHub.

Inserting the univer-

sal holder

(seefigureA)

Push the universal holder(16) onto

the SmartphoneHub from the front

until you hear it click into place➊. The

universal holder can also be fixed in

place using the two fastening

screws(17).

Inserting the smart-

phone

(seefigureB)

– Pull the front mounting

bracket(18) forwards➋.

– Insert the smartphone with the long

side of the phone positioned

against the rear mounting

bracket(19)➌.

– Allow the front mounting

bracket(18) to slide slowly to-

wards the smartphone and release

it➍.

Power supply for

the smartphone

(optional)

The smartphone can be supplied with

power (5V/1A) using a separate USB

cable (included with delivery) via the

micro-A/B USB port of the Smart-

phoneHub. To do this, connect the

smartphone to the USB port of the

SmartphoneHub using the USB cable.

Removing the

smartphone Use both hands to push the smart-

phone forwards along with the front

mounting bracket until the smart-

phone can be removed from the uni-

versal holder. If necessary, remove

the USB cable for the power supply.

Software update

If a software update is available for the SmartphoneHub, an

indicator is shown in the smartphone app. Follow the in-

structions in the app to perform the update.

Recovering the SmartphoneHub

A recovery operation should be carried out on the Smart-

phoneHub if it is no longer functioning correctly. To do this,

open the app on your smartphone and follow the instruc-

tions.

Power supply for the SmartphoneHub

The SmartphoneHub has an internal lithium-ion polymer bat-

tery (nominal/minimum 300mAh, 3.7V) that cannot be re-

moved.

The SmartphoneHub can be switched on via its on/off but-

ton(2) or via the on/off button of the eBike battery. If the

SmartphoneHub cannot be switched on, it must be charged

via a USB cable for at least 30minutes.

If you do not use your SmartphoneHub, recharge the Smart-

phoneHub every three months. You can charge the Smart-

phoneHub battery via its USB port with any power adaptor,

smartphone charger, etc.

Switching the push assistance on/off

The push assistance aids you when pushing your eBike. The

speed in this function depends on the selected gear and can

reach a maximum of 6km/h. The lower the selected gear,

the lower the speed of the push assistance function (at full

power).

uThe push assistance function must only be used when

pushing the eBike. There is a risk of injury if the wheels

of the eBike are not in contact with the ground while using

the push assistance.

To activate the push assistance, briefly press the WALK

button on your operating unit. Once it is activated, press and

hold the +button within three seconds. The eBike drive is

now switched on.

Note: The push assistance cannot be activated at assistance

level OFF.

The push assistance is switched off as soon as one of the

following occurs:

– You release the +button;

– The wheels of the eBike are locked (e.g. by applying the

brakes or hitting an obstacle);

– The speed exceeds 6km/h.

The push assistance function is subject to local regulations;

the way it works may therefore differ from the description

above, or the function may even be deactivated completely.

Setting the assistance level

On the operating unit (15), you can set the level of assist-

ance you want the eBike drive to provide you with while ped-

alling. The assistance level can be changed at any time, even

while cycling.

Note: In some models, the assistance level may be preset

and cannot be changed. There may also be fewer assistance

levels available than stated here.

The following assistance levels are available as a maximum:

–OFF: Motor assistance is switched off. The eBike can just

be moved by pedalling, as with a normal bicycle. The

push assistance cannot be activated at this assistance

level.

–ECO: Effective assistance with maximum efficiency, for

maximum range

–TOUR: Steady assistance, long range for touring

Bosch eBike Systems 1 270 020 XBC | (22.04.2020)

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Bosch SmartphoneHub CUI100 - 2021 in the language / languages: English, German, Dutch, Danish, French, Italian, Portuguese, Swedish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 2.66 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Bosch SmartphoneHub CUI100 - 2021 Manual

Product: