Manual Bosch sgs 4732 (page 37 of 92) (English, German, Dutch, French)

122899

Zoom out

Zoom in

1/92

Switching the dishwasher OFF

Several minutes after the programme has

ended:

Set the main switch 1 to OFF.

Turn the water tap off.

(Does not apply when Aqua-Stop unit

has been fitted)

Remove dishes, etc. when they have

cooled down.

Interrupting the programme

Set main switch 1 to OFF.

Indicator lights extinguish. The

programme is retained in the

dishwasher memory.

If the hot water was switched ON or the

appliance has already heated up and

then the appliance door opened, leave

the door ajar for several minutes and

then close.

Otherwise, the appliance door may fly

open due to expansion.

In order to continue with the stored

programme, set the main switch to ON

again.

Programming the timer

You can delay the start of a programme in

increments of one hour for up to 19 hours.

Switch dishwasher ON.

Immediately press the TIMER button

4 . The numerical display 3

changes to .

Press the TIMER button as many times

as necessary until the numerical display

shows the required delay.

To erase the time delay setting, keep

pressing the TIMER button until

appears in the numerical display.

You can change your programme

selection as often as you like during the

intervening period before the dish-

washer starts up.

Time-remaining indicator

The time-remaining indicator is

self-learning. When the programme

begins, it displays the estimated duration

of that programme. This figure is based

upon the duration of the previous

programme, or if the dishwasher is being

used for the first time, the duration of the

programme used for testing the appliance

in the factory. While the programme is

running, the indicator shows the amount of

time before the programme ends. The time

remaining is also adjusted to account for

the temperature of the water supply and

the number of dishes.

Cancel programme (Reset)

Only when the master switch is ON.

Press the A and C buttons

simultaneously, and hold them pressed

for approx. 3 seconds.

The numerical display shows .

Close the door.

The programme continues for approx.

1 min.

When it has ended, set the main switch

1 to OFF.

Close the detergent compartment 30 .

To restart the dishwasher, set main switch

1 to ON again and select desired

programme.

Changing the programme

It is possible to change the programme

within 2 minutes after you have switched

the dishwasher on.

Should it be necessary to change the

programme after this period, the

programme cycle that has already been

begun (e.g. washing) will be completed

first of all.

The new remaining time displayed is the

sum of the remaining time from the

preceding programme cycle and the

remaining time attributable to the new

programme that has been selected.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Bosch sgs 4732 in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 6,01 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Bosch sgs 4732 Manual

Product: