en
19
serve@Home *
* on applicable models
This dishwasher is serve@Home capable.
serve@Home is a network comprising
other serve@Home domestic appliances
besides dishwashers. Through it the
device offers you greater comfort and
mobility, at home as well as on the road.
In order for your dishwasher to become
serve@Home capable, you will need a
special accessory, the System Interface.
You can purchase this interface from your
specialist supplier. The interface must be
mounted in the chamber at the front of the
dishwasher following the installation
instructions supplied with the system
interface.
When you select your dishwasher’s mode
“Remote Control: On” you can remotely
control the device.
You can set up and start the prepared,
switched on, and closed dishwasher if you
are not at home. Equally, you can switch
off your dishwasher at any time, even if the
device is not in the Remote Control Mode.
Status Inquiry
You can check the current status of your
dishwasher at any time.
Remote Control
The serve@Home system allows you to
select the programme and to start the
dishwasher. To take advantage of this
service you must set the dishwasher’s
mode to “Remote Control: On”.
Advice and Warning Messages
These messages can be transmitted from
your dishwasher to your operating unit.
Remote Diagnosis
You can transmit error messages to the
Customer Support, thereby helping in the
diagnosis.
