Manual Bosch sgi 45 e12 (page 8 of 32) (English)

126068

Zoom out

Zoom in

1/32

Filling in the Salt

Function of the salt

During the rinse cycle the salt is being

washed automatically from the salt

compartment into the softening system

where it will dissolve the lime.

The lime-containing solution drains from

the dishwasher. Afterwards the softening

system is ready to be loaded again.

This regeneration cycle will only work

if the salt is dissolved in water.

Open the screw-type cap of the

compartment

27 .

Before switching on the appliance

for the first time, pour approx. 1 litre

of water into the salt dispenser.

Then refill with salt (not cooking salt)

until the salt container is full (max.

1.5 kg). When you refill the salt, water

is being displaced and drains off.

Therefore, to prevent corrosion, always

refill with salt immediately before

switching on the dishwasher. This way

the overflowing salt solution is diluted

and flushed immediately. Use the

enclosed salt filling aid ( in some

models).

Then clean the filling area of salt

residues and screw the compartment

lid back on without tilting the lid.

The LOW SALT indicator

on the front

panel will light up initially but will extinguish

again after a short period when the salt

solution has become sufficiently

concentrated.

If the set hardness value is

, do not add

salt because no salt is used during

operation; the salt refill indicator

is switched off.

Do not pour detergent into the

container for special salt. This

would destroy the water

softener.

Salt refill indicator

As soon as the salt refill indicator

6 is lit

on the control panel, refill with salt

immediately before the next rinse cycle.

Depending on the washing frequency and

the hardness setting, the regeneration salt

may not have to be topped up for several

months.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Bosch sgi 45 e12 in the language / languages: English as an attachment in your email.

The manual is 0,88 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Bosch sgi 45 e12 Manual

Product: