Manual Bosch sensixx B10L (page 14 of 114) (English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Turkish, Spanish, Norwegian, Finnish)

459216

Zoom out

Zoom in

1/114

Trouble shooting

Problem Possible causes Solution

The steam generator

does not come on.

• There is a connection problem.

• The main power button is not

switched on.

• Check the mains cable, the plug

and the socket.

• Switch the main power button (9)

to the on position.(“I”)

The iron does not

heat up.

• The main power button is not

switched on.

• The temperature control knob is

set to the “min” position.

• Switch the main power button (9)

to the on position.(“I”)

• Set the temperature control knob

(11) to the desired position.

4. Fill the boiler with 500 ml of fresh water.

5. Shake the base unit for a few moments

and then empty it completely over a sink or

bucket.

6. To obtain the best result, we recommend that

this operation is done twice

7. Close the cap

Cleaning & Maintenance

Important:

Always unplug the appliance from the mains

supply before carrying out any cleaning or

maintenance operation on it.

1. After ironing, pull out the plug and allow the

appliance to cool down before cleaning.

2. Wipe the housing, handle and iron body with

a damp cloth.

3. If the soleplate is soiled with dirt or scale,

clean it with a damp cloth.

4. Never use abrasive products or solvents.

Storing the appliance (D)

1. Set the main power to the “0” position and

disconnect the mains cable.

2. Always allow the appliance to cool down

before storing it.

3. Place the iron on the iron pad, standing on the

soleplate.

4. Empty the boiler and store the mains cable and

the steam hose in the storage compartment.

Do not wrap the cords too tight.

5. Use the carrying handles (17) on the sides

when moving the appliance.

Fabric protection soleplate

cover (E)

(depending on the model)

The fabric-protection soleplate cover is used for

steam-ironing delicate garments at maximum

temperature without damaging them. Use of the

soleplate cover also does away with the need for

a cloth to prevent shine on dark materials.

It is advisable to first iron a small section on the

inside of the garment to see if it is suitable.

To attach the soleplate cover to the iron, place

the tip of the iron into the end of the soleplate

cover and pull the elastic strap over the lower

rear of the iron until it fits tightly. To release the

soleplate cover, pull the elastic strap and remove

the iron.

The fabric-protection soleplate cover may

be purchased from the customer service or

specialist shops:

Accessory code

(After-sales)

Name of accessory

(Specialist outlets)

571510 TDZ2045

Tips to help you save energy

Steam production consumes the most energy.

To help minimise the energy used, follow the

advice below:

• Start by ironing the fabrics that require

the lowest ironing temperature. Check the

recommended ironing temperature in the

label on the garment.

• Try to iron the fabrics while they are still damp

and reduce the steam setting.

• If you tumble dry your fabrics before ironing

them, set the tumble drier on the ‘iron dry’

programme.

• If the fabrics are damp enough, you can iron

without steam.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Bosch sensixx B10L in the language / languages: English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Turkish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 2,43 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Bosch sensixx B10L Manual

Product: