Manual Bosch Rotak 43 LI (page 27 of 404) (English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Spanish, Norwegian, Finnish)

57871

Zoom out

Zoom in

1/404

English | 27

Bosch Power Tools F 016 L70 576 | (14.11.08)

The battery is equipped with temperature mon-

itoring that allows charging only in the tempera-

ture range between 0 °C and 45 °C. In this man-

ner, a high battery service life is achieved.

Note: The battery is supplied partially charged.

To ensure full capacity of the battery, complete-

ly charge the battery in the battery charger be-

fore using your power tool for the first time.

The lithium ion battery can be charged at any

time without reducing its service life. Interrupt-

ing the charging procedure does not damage the

battery.

The lithium-ion battery is protected against

deep discharging when used in the product.

When the battery is discharged the product is

switched off by a protective circuit and the

product no longer operates.

f Do not continue to press the On/Off switch

after an automatic shut-off of the machine.

The battery can become damaged.

Charging Procedure

The charging procedure starts as soon as the

mains plug of the battery charger is plugged into

the socket outlet and the battery 8 is inserted in-

to the charging compartment 16.

Due to the intelligent charging method, the

charging condition of the battery is automatical-

ly detected and the battery is charged with the

optimum charging current, depending on bat-

tery temperature and voltage.

This gives longer life to the battery and always

leaves it fully charged when kept in the charger

for storage.

Meaning of the Indication Elements

Control of the charging procedure is indicated

via the charge control LEDs 18 and 19:

Rapid-charging Procedure

The rapid-charging procedure is

indicated by flashing of the

green charge control LED 19.

During the charging procedure, the three green

LEDs light up one after the other and briefly go

out. The battery is fully charged when the three

green LEDs light up continuously. The three

LEDs go out again approx. 5 minutes after the

battery has been fully charged.

Note: The rapid-charging procedure is only pos-

sible when the battery temperature is within the

allowable charging temperature range, see sec-

tion “Technical Data”.

Battery Charged

Continuous lighting of the

green charge control LED 19

signals that the battery is fully

charged.

Additionally, a signal tone sounds for approx.

2 seconds, which acoustically indicates that the

battery is fully charged.

Afterwards, the battery can be removed for im-

mediate use.

With no battery inserted, continuous lighting of

the green charge control LED 19 indicates that

the mains plug is plugged into the socket and

that the battery charger is ready for operation.

Battery Temperature below 0 °C and above

45 °C

Continuous lighting of the red

LED 18 indicates that the bat-

tery temperature is not within

the rapid-charging temperature

range of 0 °C – 45 °C. As soon as the allowable

temperature range is reached, the battery

charger automatically switches to rapid charg-

ing.

When the battery is not within the allowable

temperature range, the red battery LED lights

up when inserting the battery into the battery

charger.

No charging procedure possible

If a different malfunction of the

charging procedure is present,

this will be indicated through

flashing of the red charge con-

trol LED 18.

OBJ_BUCH-882-001.book Page 27 Friday, November 14, 2008 7:42 AM

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Bosch Rotak 43 LI in the language / languages: English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 14,29 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Bosch Rotak 43 LI

Bosch Rotak 43 LI User Manual - English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Spanish, Norwegian, Finnish - 282 pages

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Bosch Rotak 43 LI Manual

Product: