Manual Bosch Rotak 39 (page 13 of 229) (English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Turkish, Spanish, Norwegian, Finnish)

591514

Zoom out

Zoom in

1/229

English | 13

Bosch Power Tools F 016 L81 153 | (1.7.14)

Electrical Safety

 Warning! Switch off, remove plug

from mains before adjusting,

cleaning or if cable is cut, dam-

aged or entangled.

 The blades continue to rotate for a

few seconds after the machine is

switched off.

 Caution – do not touch the rotat-

ing blade.

Your machine is double insulated for

safety and requires no earth connec-

tion. The operating voltage is 230 V AC,

50 Hz (for non-EU countries 220 V,

240 V as applicable). Only use ap-

proved extension cables. Contact your

Bosch Service Centre for details.

Extension cords/leads should only be

used if they comply with H05VV-F,

H05RN-F types or IEC type design

(60227 IEC 53, 60245 IEC 57).

If you want to use an extension cable

when operating your product, only the

following cable dimensions should be

used:

– 1.0 mm

: max. length 40 m

– 1.5 mm

: max. length 60 m

– 2.5 mm

: max. length 100 m

Note: If an extension cable is used it

must be earthed and connected

through the plug to the earth cable of

your supply network in accordance

with prescribed safety regulations.

If in doubt contact a qualified electrician

or the nearest Bosch Service Centre.

 WARNING! Inadequate extension

cables can be dangerous. Exten-

sion cable, plug and socket must

be of watertight construction and

intended for outdoor use.

Cable connections should be kept dry

and off the ground.

It is recommended for increased elec-

trical safety to use a Residual Current

Device (RCD) with a tripping current of

not more than 30 mA. Always check

your RCD every time you use it.

For products not sold in GB:

WARNING: For your safety, it is re-

quired that the plug attached to the ma-

chine is connected with the extension

cord. The coupling of the extension

cord must be protected against splash

water, be made of rubber or coated

with rubber. The extension cord must

be used with a cable strain relief.

The connection lead must be inspected

for signs of damage at regular intervals

and may only be used if in perfect con-

dition.

If the supply cord is damaged, it must

be replaced by a Bosch Service Centre.

Products sold in GB only: Your prod-

uct is fitted with a BS 1363/A approved

electric plug with internal fuse (ASTA

approved to BS 1362).

If the plug is not suitable for your socket

outlets, it should be cut off and an ap-

propriate plug fitted in its place by an

authorised customer service agent.

The replacement plug should have the

same fuse rating as the original plug.

The severed plug must be disposed of

to avoid a possible shock hazard and

should never be inserted into a mains

socket elsewhere.

Products sold in AUS and NZ only:

Use a residual current device (RCD)

with a rated residual current of 30 mA

or less.

OBJ_BUCH-1919-004.book Page 13 Tuesday, July 1, 2014 9:57 AM

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Bosch Rotak 39 in the language / languages: English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Turkish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 10,19 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Bosch Rotak 39 Manual

Product: