60396
16
Zoom out
Zoom in
Previous page
1/199
Next page
English - 4
The lawnmower can be set to 10 cutting heights
between 20 mm and 70 mm. For this purpose, press
the height of cut lever 12 inwards then lift or push
down the mower until required height is selected.
The blade continues to rotate for a few
seconds after the machine is switched off.
Allow the motor/blade to stop rotating be-
fore switching “on” again.
Do not rapidly switch off and on.
To aid starting tilt mower to side.
Starting:
Press and hold the safety button 2.
Squeeze the switch lever 1 towards the
handle.
Release the safety button 2.
Stopping:
Release the switch lever 1.
The mower is fitted with a blade brake. This safety
feature stops the blade from rotating in a few sec-
onds. You may notice a slight smell during the first
few operations of the brake (on releasing the On/Off
switch). This is entirely normal and will cause no
damage to your machine.
The blade maybe stiff to turn by hand while the ma-
chine is not in operation, this is due the brake.
Always wear gardening gloves when han-
dling or working near the sharp blade.
Place the lawnmower on the edge of the lawn, as
close to the power point as possible. Work away
from the power point. Then at right angles.
Position the cable to opposite side (already cut) at
the end of each turn.
When mowing do not allow the motor to la-
bour particularly in heavy conditions. When
the motor labours the speed of the motor
drops and you will hear a change in the motor
sound, when this occurs stop mowing, re-
lease the switch lever and raise the height of
cut. Failure to do so will could damage the
machine.
NOTE: The motor is protected by a safety cut out
which is activated when the blade becomes jammed
or if the motor is overloaded. When this occurs
stop, remove the plug from the power supply.
The safety cut out will only reset when the switch
lever 1 is released. Clear any obstruction and
wait for a few minutes for the safety cut out to re-
set before continuing to use the mower. At this
time do not operate the switch lever 1 as this will
prolong the reset time of the safety cut out. If the
mower cuts out again increase the height of cut
to reduce the load on the motor.
The grass combs 11 allow a very close cut to the
wall or edge. Beware of running combs into objects
while cutting close to walls/edges.
Stop, remove plug from the power supply
and remove the grassbox.
Always wear gardening gloves when han-
dling or working near the sharp blade.
Note: To ensure long and reliable service, carry out
the following maintenance regularly.
Regularly check for obvious defects such as loose,
dislodged or damaged blade, loose fixings, and
worn or damaged components.
Check that covers and guards are undamaged and
correctly fitted. Carry out necessary maintenance or
repairs before using.
If the mower should happen to fail despite the care
taken in manufacture and testing, repair should be
carried out by an authorised customer service agent
for Bosch garden products.
For all correspondence and spare parts orders, al-
ways include the 10-digit part number (TYP) from
the nameplate of the machine!
Stop, remove plug from the power supply
and remove the grassbox.
Turn the machine on its right side and inspect the
blade; if blunt or damaged, replace.
Use the following procedure to remove and replace
the blade.
Hold the blade 17 using gardening gloves (not pro-
vided) use a spanner (not provided) to remove the
blade bolt 16, blade washer 18 (ROTAK 34/37 only),
bevel washer 20 and blade. Fit the bevel washer,
blade, blade washer and the blade bolt. Ensure that
the blade is the correct way up (so that this sym-
bol can be seen located as in figure J) and tighten
the bolt firmly.
In the event of a blade becoming difficult to remove
or fit, insert a screwdriver into hole 21 to lock the
drive. Ensure the screwdriver is removed before at-
tempting to turn the machine on.
Do not lubricate blade or blade bolt during
refitting.
Starting and Stopping
Mowing
F
G
0
I
2
1
I
Maintenance
Blade Maintenance
H
F 016 L70 468 - Buch Seite 4 Mittwoch, 11. Februar 2009 9:18 09
16 • F 016 L70 468 • TMS • 09.02.09
16


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Bosch Rotak 37 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Bosch Rotak 37 in the language / languages: English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 5,01 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Bosch Rotak 37

Bosch Rotak 37 User Manual - English - 100 pages

Bosch Rotak 37 User Manual - English - 171 pages

Bosch Rotak 37 User Manual - German - 100 pages

Bosch Rotak 37 User Manual - German - 171 pages

Bosch Rotak 37 User Manual - Dutch - 100 pages

Bosch Rotak 37 User Manual - Dutch - 171 pages

Bosch Rotak 37 User Manual - Danish - 100 pages

Bosch Rotak 37 User Manual - Danish - 171 pages

Bosch Rotak 37 User Manual - French - 100 pages

Bosch Rotak 37 User Manual - French - 171 pages

Bosch Rotak 37 User Manual - Italian - 100 pages

Bosch Rotak 37 User Manual - Italian - 171 pages

Bosch Rotak 37 User Manual - Polish - 100 pages

Bosch Rotak 37 User Manual - Polish - 171 pages

Bosch Rotak 37 User Manual - Portuguese - 100 pages

Bosch Rotak 37 User Manual - Portuguese - 171 pages

Bosch Rotak 37 User Manual - Swedish - 100 pages

Bosch Rotak 37 User Manual - Swedish - 171 pages

Bosch Rotak 37 User Manual - Turkish, Spanish - 100 pages

Bosch Rotak 37 User Manual - Spanish - 171 pages

Bosch Rotak 37 User Manual - Norwegian - 100 pages

Bosch Rotak 37 User Manual - Norwegian - 171 pages

Bosch Rotak 37 User Manual - Finnish - 100 pages

Bosch Rotak 37 User Manual - Finnish - 171 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info