78191
17
Zoom out
Zoom in
Previous page
1/195
Next page
English - 5
Clean the exterior of the machine thoroughly using a
soft brush and cloth. Do not use water, solvents or
polishes. Remove all grass and debris, especially
from the ventilation slots 9.
Using a soft brush clean the grass comb 11 remov-
ing any grass and debris.
Turn the machine on its side and clean the blade
area. If grass cuttings are compacted in the blade
area, remove with a wooden or plastic implement.
Always wear gardening gloves when han-
dling or working near the sharp blade.
Store the machine in a dry place. Do not place other
objects on top of the machine.
To aid storage loosen the wing nuts 14 and fold the
handles.
Ensure cables are not trapped when folding/
unfolding top handles, do not drop the han-
dles.
Blade
ROTAK 34......................................... F016 800 271
ROTAK 37......................................... F016 800 272
ROTAK 40......................................... F016 800 273
ROTAK 43......................................... F016 800 274
The following table gives checks and actions that you can perform if your machine does not operate correctly.
If these do not identify/remedy the problem, contact your service agent.
Warning: Switch off and remove plug from mains before investigating fault.
After Mowing/Storage Accessories
Fault Finding
Symptom Possible Cause Remedy
Machine fails to operate Power turned off
Mains socket faulty
Extension cable damaged
Fuse faulty/blown
Mower in long grass
Motor protector has activated
Turn power on
Use another socket
Inspect cable, replace if damaged
Replace fuse
Increase height of cut and tilt mower
Allow to cool and increase height of
cut
Machine functions
intermittently
Extension cable damaged
Machines internal wiring damaged
Motor protector has activated
Inspect cable, replace if damaged
Contact Service Agent
Allow to cool and increase height of
cut
Machine leaves ragged
finish
or
motor labours
Height of cut too low
Cutting blade blunt
Underside of machine badly clogged
Blade fitted upside down
Increase height of cut (see “Height of
Cut Adjustment”)
Replace blade
(see “Blade Maintenance”)
Clean machine (see “After Mowing/
Storage”)
Refit blade correctly (see “Blade Main-
tenance”)
Cutting blade not rotat-
ing while machine
switched on
Cutting blade obstructed
Blade nut/bolt loose
Clear obstruction
Tighten blade nut/bolt
Excessive vibration/
noise
Blade nut/bolt loose
Cutting blade damaged
Tighten blade nut/bolt
Replace blade
F 016 L70 636 - Buch Seite 5 Freitag, 27. November 2009 9:44 09
17 • F 016 L70 636 • 09.11
17


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Bosch ROTAK 320 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Bosch ROTAK 320 in the language / languages: English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Turkish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 3,89 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Bosch ROTAK 320

Bosch ROTAK 320 User Manual - English - 10 pages

Bosch ROTAK 320 User Manual - Dutch - 170 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info