630448
16
Zoom out
Zoom in
Previous page
1/36
Next page
en Time-setting options
16
OTime-setting options
Time-setting options
Your hob has three timer functions:
Programming the cooking time
Kitchen timer
Stopwatch function
Programming the cooking time
The hotplate automatically switches off after the time
that is set has elapsed.
Setting procedure:
1. Select the hotplate and the required heat setting.
2. Touch the y symbol. The ‹‹ symbol and theV
indicator light up in the timer display.
y lights up in the display for the hotplate.
3. Within the next 10 seconds, set the required cooking
time in the settings range.
4. Touch the y symbol to confirm the selected setting.
The cooking time begins to elapse.
Notes
The same cooking time can be set automatically for
all hotplates. The set time for each of the hotplates
counts down independently.
You can find information on automatically
programming the cooking time in section ~ "Basic
settings"
If the flexible cooking zone is selected as the only
hotplate, the set time for the entire cooking zone is
the same.
If the Move function is selected for the combined
hotplate, the set time for the three hotplates is the
same.
Frying sensor
If a cooking time has been programmed for a hotplate
and the frying sensor has been activated, the cooking
time will not begin to count down until the selected
temperature setting has been reached.
Changing or deleting the time
Select the hotplate and then touch the y symbol.
Change the cooking time in the settings range or set
‹‹ to delete the programmed cooking time.
Touch the y symbol to confirm the selected setting.
When the time has elapsed
The hotplate switches off, the y display flashes and
the hotplate switches to the ‹‹ heat setting. An audible
signal sounds.
‹‹ and the V indicator flash in the timer display.
When the y symbol is touched, the indicators go out
and the acoustic signal ceases.
Notes
To set a cooking time of under 10 minutes, always
touch 0 before you select the required value.
If a cooking time was programmed for several
hotplates, the time information for the selected
hotplate is shown in the timer display.
Select the relevant hotplate to call up the remaining
cooking time.
You can set a cooking time of up to ŠŠ minutes.
The kitchen timer
You can use the kitchen timer to set a time of up to 99
minutes.
This functions independently from the hotplates and
from other settings. This function does not automatically
switch off a hotplate.
Setting procedure
1. Touch the t symbol. The ‹‹ symbol and the V
indicator light up in the timer display.
2. Select the required time on the control panel and
touch the t symbol to confirm.
After a few seconds, the time begins to elapse.
Changing or deleting the time
Touch the Y symbol.
Change the cooking time in the settings range or set
‹‹ to delete the programmed cooking time.
Touch the Y symbol to confirm the selected setting.
When the time has elapsed
An audible signal sounds once the time has elapsed.
‹‹ and the V symbol flash in the timer display.
The indicators go out after touching the t symbol.
16


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Bosch PXX995DC1E at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Bosch PXX995DC1E in the language / languages: English as an attachment in your email.

The manual is 2,84 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Bosch PXX995DC1E

Bosch PXX995DC1E User Manual - German - 36 pages

Bosch PXX995DC1E User Manual - Dutch - 64 pages

Bosch PXX995DC1E User Manual - French - 36 pages

Bosch PXX995DC1E User Manual - Italian - 64 pages

Bosch PXX995DC1E User Manual - Portuguese, Spanish - 64 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info