746104
43
Zoom out
Zoom in
Previous page
1/60
Next page
en Power manager
42
hPower manager
Po we r manager
You can use the power manager function to set the
total power of the hob.
The hob settings are preconfigured at the factory. Its
maximum performance is specified on the rating plate.
You can use the power manager function to change the
value to meet the requirements of the specific electrical
installation.
To ensure that this set value is not exceeded, the hob
has a series of components that intelligently and
automatically share the available power between the
cooking zones that are switched on.
While the power manager function is activated, the
output of a cooking zone may temporarily fall below the
nominal value. If a cooking zone is switched on and
maximum power has been reached, a corresponding
message appears in the display. The appliance controls
and selects the highest power level automatically.
For more information about how the total power of the
hob is changed, see the section entitled ~ "Basic
settings"
oHome Connect
Ho me Connect
This appliance is WLAN-enabled and settings can be
sent to the appliance via a mobile device.
If the appliance is not connected to the home network,
the appliance functions in the same way as a hob with
no network connection. The hob can always be
operated via the control panel.
The availability of the Home Connect function depends
on the availability of Home Connect services in your
country. Home Connect services are not available in
every country.You can find more information on this at
www.home-connect.com.
Notes
Hobs are not designed to be used unattended - you
must always keep an eye on the cooking process.
Ensure that you follow the safety instructions in this
instruction manual and that these are also observed
when operating the appliance via the Home Connect
app. You must also follow the instructions in the
Home Connect app.~ "Important safety
information" on page 6
Using the Home Connect app, you can send settings
to your appliance and then have to confirm them on
the appliance. It is not possible to operate the
appliance whilst you are away from home.
Operation on the appliance always has priority.
During this time, it is not possible to operate the
appliance using the Home Connect app.
Setting up
To implement settings via Home Connect, you must
have installed and set up the Home Connect app on
your mobile device.
Observe the Home Connect documents supplied for
this.
Follow the steps specified by the app to make the
settings.
The app must be open in order to perform the setup
process.
Home Connect en
43
Automatic registration in the home network
You require a router that has WPS functionality.
You require access to your router.If you do not have
this, follow the steps for "Manually logging into your
home network".
1. Open the basic settings using the f touch key.
2. Touch the "Home Connect" setting.
3. Touch "Use wizard to configure settings" to launch
the Home Connect assistant.
A message will appear regarding the mobile device.
4. Touch "Next" to continue.
5. Press the WPS button on the router within the next
2 minutes.
A message will be displayed to notify you when the
hob is successfully connected to your home
network.
Note:
If it is unable to connect, relaunch the assistant or
manually log the appliance into your home network.
A message will appear to say that the appliance can
now be connected to the app.
6. Touch "Next" to begin the process of connecting to
the app.
Once the login process is complete, a message will
appear to say that it has been successful.The
D symbol will appear in the main area on the control
panel.
Manual registration in the home network
1. Open the basic settings using the f touch key.
2. Touch the "Home Connect" setting.
3. Touch "Use wizard to configure settings" to launch
the Home Connect assistant.
You will be asked to press the WPS button on your
router.
4. Select "WPS not supported".
5. Read the message and touch "Start" to continue.
6. Open the network settings on your mobile device
and use the SSID "Home Connect" and the key
"Home Connect" to log your mobile device into the
hob network.
Note:
If it is unable to connect, relaunch the assistant and
manually log the appliance into your home network.
+RPH&RQQHFW
8VHZL]DUGWRFRQILJXUH
VHWWLQJV
&RQQHFWWRQHWZRUN
&RQQHFWLRQWRQHWZRUNVXFFHVVIXO
&RQWLQXHWRFRQQHFWWRWKHDSS
1H[W
$XWRPDWLF
QHWZRUNORJLQ
$FWLYDWHWKH:36IXQFWLRQ
RQ\RXUURXWHU
PV
:36QRWVXSSRUWHG
43


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Bosch PXX975KW1E at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Bosch PXX975KW1E in the language / languages: English as an attachment in your email.

The manual is 3,82 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Bosch PXX975KW1E

Bosch PXX975KW1E User Manual - German - 52 pages

Bosch PXX975KW1E User Manual - Dutch - 52 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info