746104
37
Zoom out
Zoom in
Previous page
1/60
Next page
en Wireless temperature sensor
36
Assist
This function can be used to cook a wide variety of
food.The appliance will choose the optimal setting for
you.
Selecting and setting the programme
1. Select a hotplate.
2. Touch menu and select the Assist option.
3. Select the programme group you require.
4. Select the type of food you want to cook.
You will be guided through the entire setting procedure
for the food you have selected, and will be provided
with information on how to cook it.
Cancelling a programme
To cancel a programme, select power setting 0 or
change the type of heating.
Wireless temperature
sensor
Wi r el ess t emper at ur e sens or
You will need to connect the wireless temperature
sensor to the control panel before using the cooking
functions for the first time.
Preparing and maintaining the wireless
temperature sensor
This section provides information on:
Adhering the silicone patch
Attaching the wireless cooking sensor
Cleaning
Changing the battery
The silicone patch and the cooking sensor can be
purchased at a later time from specialist retailers, our
technical after-sales service or our official website. To
do this, quote the relevant reference number:
Adhering the silicone patch
The silicone patch attaches the temperature sensor to
the cookware.
When a pan is used for the first time with the cooking
functions, the silicone patch must be adhered directly to
the pan. It is important
1. That the adhesive area on the pan is free from
grease. Clean the pan, dry it thoroughly and wipe the
adhesive area with a spirit.
2. Remove the protective film from the silicone patch.
Adhere the silicone patch to the outside of the pan in
the correct place using the enclosed template as a
guide.
3. Press down all over the surface of the silicone patch,
including in the centre.
The adhesive requires one hour to fully harden. Do not
use or clean the pan during this time.
Notes
Do not leave the pan with the silicone patch to soak
soapy water for long periods of time.
If the silicone patch comes off, attach a new one.
00577921 Set of 5 silicone patches
HEZ39050 Cooking sensor and set of 5 silicone patches
Wireless temperature sensor en
37
Fitting the wireless temperature sensor
Attach the temperature sensor to the silicone patch and
align it correctly.
Notes
Make sure that the silicone patch is completely dry
before attaching the temperature sensor.
Position the cookware in such a way that the
temperature sensor is pointing towards the outer
side of the hob.
To prevent overheating, the temperature sensor
must not be pointed towards another item of
cookware that is hot.
Remove the temperature sensor from the saucepan
after cooking. Store it in a clean, safe place away
from sources of heat.
You can use up to three temperature sensors at the
same time.
Connecting the wireless temperature sensor
to the control panel
To connect the wireless temperature sensor to the
control panel, follow the instructions below:
1. Open the basic settings and select "Cooking sensor"
from the menu.
2. Select the Add new cooking sensor option.
Press the å symbol on the wireless temperature
sensor within 30 seconds.
After a few seconds, the status of the connection
between the temperature sensor and the control
panel appears in the display.
The cooking functions are made available once the
cooking sensor has been connected to the control
panel correctly.
Notes
If there is a fault with the cooking sensor, the
connection may not be established correctly for the
following reasons:
Bluetooth communication error.
The symbol on the cooking sensor was not
pressed within 30 seconds.
The battery in the cooking sensor is drained.
Reset the cooking sensor and repeat the connection
procedure.
If the temperature sensor and the control panel are
not connected correctly due to a transmission error,
repeat the connection procedure.
If the display continues to indicate a connection
error, contact our technical after-sales service.
Resetting the wireless temperature sensor
1. Touch the å symbol on the cooking sensor for
approximately 8-10 seconds.
While you are doing this, the temperature sensor's
LED indicator will light up three times. When the LED
lights up for the third time, it will start to reset the
temperature sensor. Stop touching the symbol when
this happens.
Once the LED goes out, this means that the wireless
temperature sensor has been reset.
2. Repeat the connection procedure.
Cleaning
Do not clean the wireless temperature sensor in the
dishwasher.
Temperature sensor
Clean the temperature sensor with a damp cloth. Never
clean it in the dishwasher. Do not immerse it in water or
clean it under running water.
Remove the temperature sensor from the saucepan
after cooking. Store it in a clean, safe place (such as in
its packaging) away from sources of heat.
Silicone patch
Clean and dry before attaching to the temperature
sensor. Dishwasher safe.
Note:
Cookware with the silicone patch must not be left to
soak for long periods in soapy water.
Temperature sensor window
The sensor window must always be clean and dry.
Proceed as follows:
Remove dirt and oil splatters regularly.
Use a soft cloth or cotton buds and window cleaner
for cleaning.
Notes
Do not use abrasive cleaning agents such as
scouring pads, scrubbing brushes or cream
cleaners.
Do not touch the sensor window with your fingers.
This may make it dirty or scratch it.
37


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Bosch PXX975KW1E at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Bosch PXX975KW1E in the language / languages: English as an attachment in your email.

The manual is 3,82 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Bosch PXX975KW1E

Bosch PXX975KW1E User Manual - German - 52 pages

Bosch PXX975KW1E User Manual - Dutch - 52 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info