Manual Bosch PWS 8-125CE (page 27 of 180) (English, German, Dutch, Danish, French, Italian, Portuguese, Swedish, Turkish, Spanish, Norwegian, Finnish)

119899

Zoom out

Zoom in

1/180

English | 27

Bosch Power Tools 1 609 929 S71 | (13.7.09)

f After mounting the grinding tool and before

switching on, check that the grinding tool is

correctly mounted and that it can turn free-

ly. Make sure that the grinding tool does

not graze against the protection guard or

other parts.

Flap Disc

f For operations with the flap disc, always

mount the hand guard 13.

Rubber Sanding Plate

f For operations with the rubber sanding

plate 14, always mount the hand guard 13.

See graphics page for the mounting sequence.

Screw on the round nut 16 and tighten with the

two-pin spanner.

Cup Brush/Disc Brush

f For operations with the cup brush/wheel

brush, always mount the hand guard 13.

See graphics page for the mounting sequence.

The cup brush/disc brush must be able to be

screwed onto the grinder spindle until it rests

firmly against the grinder spindle flange at the

end of the grinder spindle threads. Tighten the

cup brush/disc brush with an open-end span-

ner.

Quick-clamping Nut

For convenient changing of grinding tools with-

out the use of additional tools, you can use the

quick-clamping nut 12 instead of the clamping

nut 11.

f The quick-clamping nut 12 may be used only

for grinding or cutting discs.

Use only a flawless, undamaged quick-clamp-

ing nut 12.

When screwing on, pay attention that the side

of the quick-clamping nut 12 with printing

does not face the grinding disc; the arrow must

point to the index mark 20.

Lock the grinder spin-

dle with the spindle

lock button 2. To tight-

en the quick-clamping

nut, firmly turn the

grinding disc in clock-

wise direction.

A properly attached,

undamaged quick-

clamping nut can be

loosened by hand

when turning the

knurled ring in anti-

clockwise direction.

Never loosen a tight

quick-clamping nut

with pliers. Always

use the two-pin span-

ner. Insert the two-pin spanner as shown in the

illustration.

Approved Grinding Tools

All grinding tools mentioned in these operating

instructions can be used.

The permissible speed [min

-1

] or the circumfer-

ential speed [m/s] of the grinding tools used

must at least match the values given in the table.

Therefore, observe the permissible rotation-

al/circumferential speed on the label of the

grinding tool.

OBJ_BUCH-975-002.book Page 27 Monday, July 13, 2009 5:33 PM

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Bosch PWS 8-125CE in the language / languages: English, German, Dutch, Danish, French, Italian, Portuguese, Swedish, Turkish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 7,59 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Bosch PWS 8-125CE

Bosch PWS 8-125CE User Manual - English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Spanish, Norwegian, Finnish - 115 pages

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Bosch PWS 8-125CE Manual

Product: