Manual Bosch PWS 8-125CE (page 23 of 180) (English, German, Dutch, Danish, French, Italian, Portuguese, Swedish, Turkish, Spanish, Norwegian, Finnish)

119899

Zoom out

Zoom in

1/180

English | 23

Bosch Power Tools 1 609 929 S71 | (13.7.09)

f Use extra caution when making a “pocket

cut” into existing walls or other blind areas.

The protruding wheel may cut gas or water

pipes, electrical wiring or objects that can

cause kickback.

Safety warnings specific for sanding opera-

tions

f Do not use excessively oversized sanding

disc paper. Follow manufacturers recom-

mendations, when selecting sanding paper.

Larger sanding paper extending beyond the

sanding pad presents a laceration hazard and

may cause snagging, tearing of the disc, or

kickback.

Safety warnings specific for wire brushing op-

erations

f Be aware that wire bristles are thrown by

the brush even during ordinary operation.

Do not overstress the wires by applying ex-

cessive load to the brush. The wire bristles

can easily penetrate light clothing and/or

skin.

f If the use of a guard is recommended for

wire brushing, do not allow any interfer-

ence of the wire wheel or brush with the

guard. Wire wheel or brush may expand in di-

ameter due to work load and centrifugal forc-

es.

Additional safety warnings

Wear safety goggles.

f Use suitable detectors to determine if utili-

ty lines are hidden in the work area or call

the local utility company for assistance.

Contact with electric lines can lead to fire

and electric shock. Damaging a gas line can

lead to explosion. Penetrating a water line

causes property damage or may cause an

electric shock.

f Release the On/Off switch and set it to the

off position when the power supply is inter-

rupted, e. g., in case of a power failure or

when the mains plug is pulled. This prevents

uncontrolled restarting.

f When working stone, use dust extraction.

The vacuum cleaner must be approved for

the extraction of stone dust. Using this

equipment reduces dust-related hazards.

f Use a cutting guide when cutting stone.

Without sideward guidance, the cutting disc

can jam and cause kickback.

f When working with the machine, always

hold it firmly with both hands and provide

for a secure stance. The power tool is guided

more secure with both hands.

f Secure the workpiece. A workpiece clamped

with clamping devices or in a vice is held

more secure than by hand.

f Keep your workplace clean. Blends of mate-

rials are particularly dangerous. Dust from

light alloys can burn or explode.

f Never use the machine with a damaged ca-

ble. Do not touch the damaged cable and

pull the mains plug when the cable is dam-

aged while working. Damaged cables in-

crease the risk of an electric shock.

Products sold in GB only: Your product is fitted

with an BS 1363/A approved electric plug with

internal fuse (ASTA approved to BS 1362).

If the plug is not suitable for your socket outlets,

it should be cut off and an appropriate plug fit-

ted in its place by an authorised customer serv-

ice agent. The replacement plug should have the

same fuse rating as the original plug.

The severed plug must be disposed of to avoid a

possible shock hazard and should never be in-

serted into a mains socket elsewhere.

Products sold in AUS and NZ only: Use a resid-

ual current device (RCD) with a rated residual

current of 30 mA or less.

Functional Description

Read all safety warnings and all in-

structions. Failure to follow the

warnings and instructions may re-

sult in electric shock, fire and/or se-

rious injury.

OBJ_BUCH-975-002.book Page 23 Monday, July 13, 2009 5:33 PM

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Bosch PWS 8-125CE in the language / languages: English, German, Dutch, Danish, French, Italian, Portuguese, Swedish, Turkish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 7,59 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Bosch PWS 8-125CE

Bosch PWS 8-125CE User Manual - English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Spanish, Norwegian, Finnish - 115 pages

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Bosch PWS 8-125CE Manual

Product: