Manual Bosch PWS 750-125 (page 22 of 166) (English, German, Dutch, Danish, French, Italian, Portuguese, Swedish, Turkish, Spanish, Norwegian, Finnish)

78344

Zoom out

Zoom in

1/166

22 | English

1 609 929 R16 | (14.2.08) Bosch Power Tools

f Maintain a firm grip on the power tool and

position your body and arm to allow you to

resist kickback forces. Always use auxiliary

handle, if provided, for maximum control

over kickback or torque reaction during

start-up. The operator can control torque re-

actions or kickback forces, if proper precau-

tions are taken.

f Never place your hand near the rotating ac-

cessory. The accessory may kickback over

your hand.

f Do not position your body in the area where

the power tool will move if kickback occurs.

Kickback will propel the tool in the direction

opposite to the wheel’s movement at the

point of snagging.

f Use special care when working corners,

sharp edges, etc. Avoid bouncing and snag-

ging the accessory. Corners, sharp edges or

bouncing have a tendency to snag the rotat-

ing accessory and cause loss of control or

kickback.

f Do not attach a saw chain woodcarving

blade or toothed saw blade. Such blades

create frequent kickback and loss of control

over the power tool.

Additional safety instructions for grind-

ing and cutting off operations

f Use only wheel types that are recommend-

ed for your power tool and the specific

guard designed for the selected wheel.

Wheels for which the power tool was not de-

signed cannot be adequately guarded and

are unsafe.

f The guard must be securely attached to the

power tool and positioned for maximum

safety, so the least amount of wheel is ex-

posed towards the operator. The guard

helps to protect operator from broken wheel

fragments and accidental contact with

wheel.

f Wheels must be used only for recommend-

ed applications. For example: do not grind

with the side of the cut-off wheel. Abrasive

cut-off wheels are intended for peripheral

grinding; side forces applied to these wheels

may cause them to shatter.

f Always use undamaged wheel flanges that

are of correct size and shape for your se-

lected wheel. Proper wheel flanges support

the wheel thus reducing the possibility of

wheel breakage. Flanges for cut-off wheels

may be different from grinding wheel flanges.

f Do not use worn down wheels from larger

power tools. Wheels intended for larger

power tools are not suitable for the higher

speed of a smaller tool and may burst.

Additional safety warnings specific for

abrasive cutting off operations

f Do not “jam” the cut-off wheel or apply ex-

cessive pressure. Do not attempt to make

an excessive depth of cut. Overstressing the

wheel increases the loading and susceptibili-

ty to twisting or binding of the wheel in the

cut and the possibility of kickback or wheel

breakage.

f Do not position your body in line with and

behind the rotating wheel. When the wheel,

at the point of operation, is moving away

from your body, the possible kickback may

propel the spinning wheel and the power

tool directly at you.

f When wheel is binding or when interrupting

a cut for any reason, switch off the power

tool and hold the power tool motionless un-

til the wheel comes to a complete stop. Nev-

er attempt to remove the cut-off wheel from

the cut while the wheel is in motion, other-

wise kickback may occur. Investigate and

take corrective action to eliminate the cause

of wheel binding.

f Do not restart the cutting operation in the

workpiece. Let the wheel reach full speed

and carefully reenter the cut. The wheel may

bind, walk up or kickback if the power tool is

restarted in the workpiece.

OBJ_BUCH-393-003.book Page 22 Thursday, February 14, 2008 3:56 PM

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Bosch PWS 750-125 in the language / languages: English, German, Dutch, Danish, French, Italian, Portuguese, Swedish, Turkish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 6,86 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Bosch PWS 750-125

Bosch PWS 750-125 User Manual - English, German, Dutch, Danish, French, Italian, Portuguese, Swedish, Turkish, Spanish, Norwegian, Finnish - 167 pages

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Bosch PWS 750-125 Manual

Product: