Manual Bosch PWS 750-125 (page 27 of 167) (English, German, Dutch, Danish, French, Italian, Portuguese, Swedish, Turkish, Spanish, Norwegian, Finnish)

78344

Zoom out

Zoom in

1/167

English | 27

Bosch Power Tools 1 609 929 R16 | (28.9.09)

Flap Disc

f For operations with the flap disc, always

mount the hand guard 11.

Rubber Sanding Plate

f For operations with the rubber sanding

plate 12, always mount the hand guard 11.

See graphics page for the mounting sequence.

Screw on the round nut 14 and tighten with the

two-pin spanner.

Cup Brush/Disc Brush

f For operations with the cup brush/wheel

brush, always mount the hand guard 11.

See graphics page for the mounting sequence.

The cup brush/disc brush must be able to be

screwed onto the grinder spindle until it rests

firmly against the grinder spindle flange at the

end of the grinder spindle threads. Tighten the

cup brush/disc brush with an open-end spanner.

Approved Grinding Tools

All grinding tools mentioned in these operating

instructions can be used.

The permissible speed [min

-1

] or the circumfer-

ential speed [m/s] of the grinding tools used

must at least match the values given in the table.

Therefore, observe the permissible rotation-

al/circumferential speed on the label of the

grinding tool.

Dust/Chip Extraction

f Dusts from materials such as lead-containing

coatings, some wood types, minerals and

metal can be harmful to one’s health. Touch-

ing or breathing-in the dusts can cause aller-

gic reactions and/or lead to respiratory infec-

tions of the user or bystanders.

Certain dusts, such as oak or beech dust, are

considered as carcinogenic, especially in

connection with wood-treatment additives

(chromate, wood preservative). Materials

containing asbestos may only be worked by

specialists.

– Use dust extraction whenever possible.

– Provide for good ventilation of the work-

ing place.

– It is recommended to wear a P2 filter-

class respirator.

Observe the relevant regulations in your

country for the materials to be worked.

Operation

Starting Operation

f Observe correct mains voltage! The voltage

of the power source must agree with the

voltage specified on the nameplate of the

machine. Power tools marked with 230 V

can also be operated with 220 V.

When operating the machine with power from

mobile generators that do not have sufficient re-

serve capacity or are not equipped with suitable

voltage control with starting current amplifica-

tion, loss of performance or untypical behavior

can occur upon switching on.

Please observe the suitability of the power gen-

erator being used, particularly with regard to

the mains voltage and frequency.

Switching On and Off

To start the power tool, push the On/Off switch

3 forwards.

To lock the On/Off switch 3, press the On/Off

switch 3 down at the front until it latches.

max.

[mm]

D b d [min

-1

] [m/s]

115

125

22.2

11000

115

125

–

11000

75 30 M 14 11000 45

OBJ_BUCH-393-004.book Page 27 Monday, September 28, 2009 2:16 PM

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Bosch PWS 750-125 in the language / languages: English, German, Dutch, Danish, French, Italian, Portuguese, Swedish, Turkish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 6,81 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Bosch PWS 750-125

Bosch PWS 750-125 User Manual - English, German, Dutch, Danish, French, Italian, Portuguese, Swedish, Turkish, Spanish, Norwegian, Finnish - 166 pages

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Bosch PWS 750-125 Manual

Product: