473396
18
Zoom out
Zoom in
Previous page
1/117
Next page
18 | English
2 609 005 556 | (23.9.11) Bosch Power Tools
Technical Data
Declaration of Conformity
We declare under our sole responsibility that the product de-
scribed under “Technical Data” is in conformity with the fol-
lowing standards or standardization documents: EN 60745
according to the provisions of the directives 2011/65/EU,
2004/108/EC, 2006/42/EC.
Technical file (2006/42/EC) at:
Robert Bosch GmbH, PT/ETM9,
D-70745 Leinfelden-Echterdingen
Robert Bosch GmbH, Power Tools Division
D-70745 Leinfelden-Echterdingen
01.09.2011
Assembly
Mounting the Protective Devices
f Before any work on the machine itself, pull the mains
plug.
Note: After breakage of the grinding disc during operation or
damage to the holding fixtures on the protection guard/power
tool, the machine must promptly be sent to an after-sales
service agent for maintenance (for addresses, see section
„After-sales Service and Customer Assistance“.
Protection Guard for Grinding
Place the protection guard 6 onto
the spindle collar of the machine
until the encoding keys of the pro-
tection guard agree with the spin-
dle collar. Press and hold the re-
lease lever 1 while doing this.
Press the protection guard 6 onto
the spindle collar until the shoul-
der of the protection guard is
seated against the flange of the
machine, and turn the protection
guard until it can clearly be heard
to engage.
Adjust the position of the protec-
tion guard 6 to the requirements
of the work process. For this, press the release lever 1 up-
ward and turn the protection guard 6 to the required position.
f Always adjust the protection guard 6 in such a manner
that all 3 red cams of release lever 1 engage into the
corresponding notches of the protection guard 6.
f Adjust the protection guard 6 in such a manner that
sparking is prevented in the direction of the operator.
f The protection guard 6 may be turned only upon actua-
tion of the release lever 1! Otherwise the power tool
may not continue to be used under any circumstances
and must be taken to an after-sales service agent.
Note: The encoding keys on the protection guard 6 ensure
that only a protection guard that fits the machine type can be
mounted.
Protection Guard for Cutting
f For cutting with bonded abrasives, always use the pro-
tection guard for cutting 10.
f Provide for sufficient dust extraction when cutting
stone.
The protection guard for cutting 10 is mounted in the same
manner as the protection guard for grinding 6.
Angle Grinder PWS ... 700-115 720-115 720-125 750-115 750-125
Article number
3 603 ... A64 2.. A64 0.. A64 0.. A64 1.. A64 1..
Rated power input
W705720 720 750 750
Output power
W380360 360 450 450
Rated speed
min
-1
11000 11000 11000 11000 11000
Grinding disc diameter, max.
mm 115 115 125 115 125
Thread of grinder spindle
M 14 M 14 M 14 M 14 M 14
Thread length (max.) of grinder spindle
mm 21 21 21 21 21
Weight according to EPTA-Procedure 01/2003
kg 1.9 1.9 1.9 1.9 1.9
Protection class
/II /II /II /II /II
The values given are valid for a nominal voltage [U] of 230 V. For different voltages and models for specific countries, these values can vary.
Please observe the article number on the type plate of your machine. The trade names of the individual machines may vary.
Dr. Egbert Schneider
Senior Vice President
Engineering
Dr. Eckerhard Strötgen
Engineering Director
PT/ESI
OBJ_DOKU-28019-001.fm Page 18 Friday, September 23, 2011 8:28 AM
18


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Bosch PWS 750-115 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Bosch PWS 750-115 in the language / languages: English, German, Dutch, Danish, French, Italian, Portuguese, Swedish, Turkish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 7,88 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info