Manual Bosch PWS 6-115 (page 13 of 115) (English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Spanish, Norwegian, Finnish)

119893

Zoom out

Zoom in

1/115

English - 2

The machine is intended for cutting, roughing and

brushing metal and stone materials without using

water. For cutting stone, a cutting guide is re-

quired.

For machines with electronic control: With ap-

proved sanding tools, the machine can be used

for sanding and polishing.

Measured values determined according to

EN 50 144.

Typically the A-weighted noise levels of the ma-

chine are: Sound pressure level: 88 dB (A);

sound power level: 101 dB (A).

Wear hearing protection!

When using the standard auxiliary handle, the

typically weighted maximum acceleration is

5.3 m/s

When using the vibration-dampening auxiliary

handle, the typically weighted maximum acceler-

ation is 5.3 m/s

. The hand-arm vibration at the

auxiliary handle is typically lower than 2.5 m/s

The numbering of the machine elements refers to

the illustration of the machine on the graphics

page.

While reading the operating instructions, unfold

the graphics page for the machine and leave it

open.

1 On/Off switch

2 Thumbwheel for speed preselection

(PWS 8-125 CE/PWS 9-125 CE)

3 Spindle lock button

4 Auxiliary handle

5 Grinder spindle

6 Protection guard

7 Clamping lever

8 Mounting flange

(for the M 14 grinding spindle with O-ring)

9 Grinding-/cutting disc*

10 Clamping nut

11 quick-clamping nut*

12 Hand guard*

13 Rubber sanding plate*

14 Sanding sheet*

15 Round nut*

16 Cup brush*

17 Cutting guide with dust extraction protection

guard*

18 Diamond cutting disc*

19 Mounting flange M 10

* Not all of the accessories illustrated or described are

included as standard delivery.

Working safely with this ma-

chine is possible only when the

operating and safety information

are read completely and the in-

structions contained therein are

strictly followed. Additionally,

the general safety instructions either in the

enclosed booklet or those added in the centre

of these operating instructions must be ob-

served. Before using for the first time, ask for

a practical demonstration.

Wear hearing protection.

■ Wear safety goggles.

■ Wear additional protection equipment for your

safety, such as protective gloves, sturdy

shoes, hard hat and apron.

■ The dust that is produced while working can be

detrimental to health, inflammable or explo-

sive. Suitable safety measures are required.

Examples: Some dusts are regarded as carci-

nogenic. Use suitable dust/chip extraction and

wear a dust protection mask.

■ Dust from light alloys can burn or explode. Al-

ways keep the workplace clean, as blends of

materials are particularly dangerous.

■ If the mains cable is damaged or cut through

while working, do not touch the cable but im-

mediately pull the mains plug. Never use the

machine with a damaged cable.

■ Connect machines that are used in the open

via a residual current device (RCD) with an ac-

tuating current of 30 mA maximum. Do not op-

erate the machine in rain or moisture.

■ When working with the machine, always hold it

firmly with both hands and provide for a secure

stance.

■ Secure the workpiece. A workpiece clamped

with clamping devices or in a vice is held more

securely than by hand.

Intended Use

Noise/Vibration Information

Machine Elements

For Your Safety

2 609 000 850.book Seite 2 Montag, 23. Januar 2006 9:16 09

13 • 2 609 000 850 • 06.01

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Bosch PWS 6-115 in the language / languages: English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 5,8 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Bosch PWS 6-115

Bosch PWS 6-115 User Manual - English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Spanish, Norwegian, Finnish - 99 pages

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Bosch PWS 6-115 Manual

Product: