Manual Bosch PWS 20-230 J (page 16 of 111) (English, German, Dutch, Danish, French, Italian, Portuguese, Swedish, Turkish, Spanish, Norwegian, Finnish)

79064

Zoom out

Zoom in

1/111

English - 6

☞

Test run!

Check the grinding tool before use. The

grinding tool must be properly mounted

and rotate freely. Perform a test run of at

least 30 seconds without load. Do not use

damaged, out-of-round or vibrating grind-

ing tools.

Reduced Starting Current

(PWS 20-230 J)

As a result of soft starting, a 13 A fuse is

adequate.

A machine without reduced starting current

requires higher fuse protection (use at least

a 13 A time-delay fuse).

■ Clamp the workpiece if it does not remain

stationary due to its own weight.

■ Do not strain the machine so heavily that it

comes to a standstill.

■ Grinding and cutting discs become very

hot while working; do not touch until they

have cooled.

Rough Grinding

The best roughing results are

achieved when setting the machine

at an angle of 30° to 40°. Move the

machine back and forth with mod-

erate pressure. In this manner, the

workpiece will not become too hot,

does not discolour and no grooves

are formed.

Never use a cutting disc for roughing.

Flap Disc

With the flap disc (accessory), curved surfaces

and profiles (contour sanding) can be worked.

Flap discs have a considerably higher service life

than sanding sheets, lower noise level and lower

sanding temperatures.

Cutting

When cutting, do not press, jam or

oscillate the machine. Work with

moderate feed, adapted to the ma-

terial being machined.

Do not reduce the speed of running

down cutting discs by applying

sideward pressure.

The direction in

which the cutting is

performed is impor-

tant.

The machine must

always work in an

up-grinding motion.

Therefore, never

move the machine in

the other direction!

Otherwise, the dan-

ger exists of it being

pushed uncon-

trolled out of the cut.

Grinder Stand

With the grinder stand 26 (accessory), work-

pieces can be cut at angles of 0 to 45° at the

same lengths.

The safety notes and operating instructions in the

respective operating instructions manual of the

angle grinder are to be strictly observed. Use only

original Bosch grinder stands.

Operating Instructions

1 609 929 R44 - Buch Seite 6 Dienstag, 11. März 2008 2:06 14

16 • 1 609 929 R44 • 05.01

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Bosch PWS 20-230 J in the language / languages: English, German, Dutch, Danish, French, Italian, Portuguese, Swedish, Turkish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 5,19 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Bosch PWS 20-230 J Manual

Product: