Manual Bosch PWS 1500 (page 13 of 28) (English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Turkish, Spanish, Norwegian, Finnish)

543996

Zoom out

Zoom in

1/28

1 609 929 R38 | (26.6.08) Bosch Power Tools

14 | English

Dust/Chip Extraction

f Dusts from materials such as lead-containing

coatings, some wood types, minerals and

metal can be harmful to one’s health. Touch-

ing or breathing-in the dusts can cause aller-

gic reactions and/or lead to respiratory infec-

tions of the user or bystanders.

Certain dusts, such as oak or beech dust, are

considered as carcinogenic, especially in con-

nection with wood-treatment additives (chro-

mate, wood preservative). Materials contain-

ing asbestos may only be worked by

specialists.

– Use dust extraction whenever possible.

– Provide for good ventilation of the working

place.

– It is recommended to wear a P2 filter-class

respirator.

Observe the relevant regulations in your coun-

try for the materials to be worked.

Operation

Starting Operation

f Observe correct mains voltage! The voltage

of the power source must agree with the

voltage specified on the nameplate of the

machine. Power tools marked with 230 V can

also be operated with 220 V.

When operating the machine with power from

mobile generators that do not have sufficient re-

serve capacity or are not equipped with suitable

voltage control with starting current amplifica-

tion, loss of performance or untypical behavior

can occur upon switching on.

Please observe the suitability of the power gen-

erator being used, particularly with regard to the

mains voltage and frequency.

Switching On and Off

To start the power tool, push the On/Off switch

2 forwards.

To lock the On/Off switch 2, press the On/Off

switch 2 down at the front until it latches.

To switch off the power tool, release the On/Off

switch 2 or, if it is locked, briefly push down the

back of the On/Off switch 2 and then release it.

f Check grinding tools before using. The grind-

ing tool must be mounted properly and be

able to move freely. Carry out a test run for

at least one minute with no load. Do not use

damaged, out-of-centre or vibrating grinding

tools. Damaged grinding tools can burst and

cause injuries.

Working Advice

f Clamp the workpiece if it does not remain

stationary due to its own weight.

f Do not strain the machine so heavily that it

comes to a standstill.

f Grinding and cutting discs become very hot

while working; do not touch until they have

cooled.

Rough Grinding

f Never use a cutting disc for roughing.

The best roughing results are achieved when set-

ting the machine at an angle of 30° to 40°. Move

the machine back and forth with moderate pres-

sure. In this manner, the workpiece will not be-

come too hot, does not discolour and no grooves

are formed.

Flap Disc

With the flap disc (accessory), curved surfaces

and profiles can be worked.

Flap discs have a considerably higher service life,

lower noise levels and lower sanding tempera-

tures than conventional sanding sheets.

Cutting Metal

f For cutting metal, always work with the pro-

tection guard for cutting 12.

When cutting, work with moderate feed, adapted

to the material being cut. Do not exert pressure

onto the cutting disc, tilt or oscillate the ma-

chine.

Do not reduce the speed of running down cutting

discs by applying sideward pressure.

OBJ_BUCH-758-001.book Page 14 Thursday, June 26, 2008 9:29 AM

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Bosch PWS 1500 in the language / languages: English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Turkish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 2,56 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Bosch PWS 1500 Manual

Product: