Manual Bosch PWS 1500 (page 9 of 28) (English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Turkish, Spanish, Norwegian, Finnish)

543996

Zoom out

Zoom in

1/28

1 609 929 R38 | (26.6.08) Bosch Power Tools

10 | English

Safety warnings specific for sanding op-

erations

f Do not use excessively oversized sanding

disc paper. Follow manufacturers recom-

mendations, when selecting sanding paper.

Larger sanding paper extending beyond the

sanding pad presents a laceration hazard and

may cause snagging, tearing of the disc, or

kickback.

Safety warnings specific for wire brush-

ing operations

f Be aware that wire bristles are thrown by

the brush even during ordinary operation.

Do not overstress the wires by applying ex-

cessive load to the brush. The wire bristles

can easily penetrate light clothing and/or skin.

f If the use of a guard is recommended for

wire brushing, do not allow any interference

of the wire wheel or brush with the guard.

Wire wheel or brush may expand in diameter

due to work load and centrifugal forces.

Additional safety warnings

Wear safety goggles.

f Use suitable detectors to determine if utility

lines are hidden in the work area or call the

local utility company for assistance. Contact

with electric lines can lead to fire and electric

shock. Damaging a gas line can lead to explo-

sion. Penetrating a water line causes property

damage or may cause an electric shock.

f Release the On/Off switch and set it to the

off position when the power supply is inter-

rupted, e. g., in case of a power failure or

when the mains plug is pulled. This prevents

uncontrolled restarting.

f When working stone, use dust extraction.

The vacuum cleaner must be approved for

the extraction of stone dust. Using this

equipment reduces dust-related hazards.

f Use a cutting guide when cutting stone.

Without sideward guidance, the cutting disc

can jam and cause kickback.

f When working with the machine, always

hold it firmly with both hands and provide

for a secure stance. The power tool is guided

more secure with both hands.

f Secure the workpiece. A workpiece clamped

with clamping devices or in a vice is held more

secure than by hand.

f Keep your workplace clean. Blends of mate-

rials are particularly dangerous. Dust from

light alloys can burn or explode.

f Never use the machine with a damaged ca-

ble. Do not touch the damaged cable and pull

the mains plug when the cable is damaged

while working. Damaged cables increase the

risk of an electric shock.

Functional Description

Read all safety warnings and all in-

structions. Failure to follow the

warnings and instructions may result

in electric shock, fire and/or serious

injury.

While reading the operating instructions, unfold

the graphics page for the machine and leave it

open.

Intended Use

The machine is intended for cutting, roughing,

and brushing metal and stone materials without

using water.

For cutting metal, a special protection guard for

cutting (accessory) must be used.

For cutting stone, a special extraction hood for

cutting with cutting guide (accessory) must be

used.

With approved sanding tools, the machine can be

used for sanding with sanding discs.

OBJ_BUCH-758-001.book Page 10 Thursday, June 26, 2008 9:29 AM

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Bosch PWS 1500 in the language / languages: English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Turkish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 2,56 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Bosch PWS 1500 Manual

Product: