543995
11
Zoom out
Zoom in
Previous page
1/28
Next page
1 609 929 R38 | (26.6.08) Bosch Power Tools
12 | English
Protection Guard for Cutting
f For cutting metal, always work with the pro-
tection guard for cutting 12.
f For cutting stone, always work with the cut-
ting guide with dust extraction protection
guard 19.
The protection guard for cutting 12 is mounted in
the same manner as the protection guard for
sanding 7.
Auxiliary Handle
f Operate your machine only with the auxiliary
handle 4.
Screw the auxiliary handle 4 on the right or left of
the machine head depending on the working
method.
Vibration-dampening Auxiliary Handle
The vibration-dampening auxiliary handle reduc-
es the vibrations, making operation more com-
fortable and secure.
f Do not make any alterations to the auxiliary
handle.
Do not continue to use an auxiliary handle if it
is damaged.
Hand Guard
f For operations with the rubber sanding plate
15 or with the cup brush/wheel brush/flap
disc, always mount the hand guard 14.
The hand guard 14 is fastened with the auxiliary
handle 4.
Mounting the Grinding Tools
f Before any work on the machine itself, pull
the mains plug.
f Grinding and cutting discs become very hot
while working; do not touch until they have
cooled.
Clean the grinder spindle 5 and all parts to be
mounted.
For clamping and loosening the grinding tools,
lock the grinder spindle with the spindle lock
button 1.
f Actuate the spindle lock button only when
the grinder spindle is at a standstill. Other-
wise, the machine may become damaged.
Grinding/Cutting Disc
Pay attention to the dimensions of the grinding
tools. The mounting hole diameter must fit the
mounting flange without play. Do not use reduc-
ers or adapters.
When using diamond cutting discs, pay attention
that the direction-of-rotation arrow on the dia-
mond cutting disc and the direction of rotation of
the machine (see direction-of-rotation arrow on
the machine head) agree.
See graphics page for the mounting sequence.
To fasten the grinding/cutting disc, screw on the
clamping nut 10 and tighten with the two-pin
spanner; see Section “Quick-clamping Nut ”.
f After mounting the grinding tool and before
switching on, check that the grinding tool is
correctly mounted and that it can turn free-
ly. Make sure that the grinding tool does not
graze against the protection guard or other
parts.
Mounting flange for grinding
spindle M 14: An O-ring (plastic
part) is inserted in the mount-
ing flange 8 around the centring
collar. If the O-ring is missing
or is damaged, it must in all
cases be replaced (article
number 1 600 210 039) before the mounting
flange 8 is mounted.
Mounting flange for grinding spindle M 10: The
mounting flange can be used on both sides.
Flap Disc
f For operations with the flap disc, always
mount the hand guard 14.
Rubber Sanding Plate
f For operations with the rubber sanding plate
15, always mount the hand guard 14.
See graphics page for the mounting sequence.
Screw on the round nut 17 and tighten with the
two-pin spanner.
OBJ_BUCH-758-001.book Page 12 Thursday, June 26, 2008 9:29 AM
11


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Bosch PWS 1000 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Bosch PWS 1000 in the language / languages: English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Turkish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 2,56 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info