English - 4
Press the protection guard onto the spindle collar
until the collar of the protection guard faces
against the flange of the machine and the encod-
ing keys engage in the circular groove at the spin-
dle collar.
Rotate the protection guard 6 in clockwise direc-
tion to the required position (working position).
Adjust the protection guard 6 in such a man-
ner that sparks are not emitted in the direc-
tion of the operator.
Note: Encoding keys on the protection guard 6
ensure that only a protection guard that fits the
machine type can be mounted.
Disassemble in the reverse sequence.
Vibration-dampening Auxiliary Handle
The vibration-dampening auxiliary handle re-
duces the vibrations, making operation more
comfortable and secure.
Do not make any alterations to the aux-
iliary handle.
Do not continue to use an auxiliary handle if it is
damaged.
■ For all work with the machine, the auxiliary
handle 3 must be mounted.
Screw the auxiliary handle 3 on the right or left of
the machine head depending on the working
method.
Hand Guard
For work with the rubber sanding pad 13 or with
the cup brush 16/disc brush/flap disc, mounting
the hand guard 12 (accessory) is recommended.
The hand guard 12 is fastened with the auxiliary
handle 3.
■ Before any work on the machine itself, pull
the mains plug.
Use only grinding tools with a permissi-
ble speed at least as high as the no-load
speed of the machine.
Grinding and cutting discs become very
hot while working; do not touch until
they have cooled.
■ Clean the grinder spindle and all parts to be
mounted. For clamping and loosening the
grinding tools, lock the grinder spindle 5 with
the spindle lock button 4.
Actuate the spindle lock button 4 only when
the grinder spindle is at a standstill!
6
7
6
7
Mounting the Grinding Tools
17 • 1 609 929 F15 • TMS • 03.06.03
