657513
12
Zoom out
Zoom in
Previous page
1/75
Next page
English3
1 270 020 XBP | (13.4.16) Bosch eBike Systems
Setting the Assistance Level
On the on-board computer you can set how much the eBike
drive assists you while pedalling. The assistance level can be
changed at any time, even while cycling.
Note: For individual versions, it is possible that the assistance
level is pre-set and cannot be changed. It is also possible that
less assistance levels are available for selection than listed
here.
The following assistance levels (max.) are available:
“OFF”: The motor assistance is switched off, and the eBike
can be moved as a normal bicycle only by pedalling. The
push assistance cannot be activated in this assistance
level.
“ECO”: Effective assistance at maximum efficiency for
maximum cruising range
“TOUR”: Uniform assistance, for touring with long cruising
range
“SPORT”: Powerful assistance for sportive riding off road
as well as for urban traffic
“TURBO”: Maximum assistance, supporting highest
cadence for sportive riding
To increase the assistance level, short-press the button
“+” 6 on the on-board computer repeatedly until the required
assistance level appears in indicator i. To decrease the assis-
tance level, short-press the button “–” 5.
Switching bike lights on/off
In the version which has the bike lights powered by the eBike
system, medium-press the button “+” to switch on the
front and rear lights at the same time. To switch off the bike
lights, long-press the button “+”.
The lighting symbol h is displayed when the light is on.
Switching the bike light on and off has no effect on the back
lighting of the display.
Displays and configurations of the on-board
computer
Speed and Distance Indication
The speed indication a always displays the current speed.
Indicator i always displays the last setting as standard. Repeat-
edly medium-press the button “–” to display the trip dis-
tance “TRIP”, the total distance “TOTAL” and the range of the
battery pack “RANGE” one after the other. (Short-pressing
the button “–” will decrease the assistance level!)
The trip distance “TRIP” is reset by simultaneously long-
pressing the buttons “+ and “–”. The display will initially
show “RESET”. If you continue to press both buttons, the trip
distance “TRIP” will be set to “0”.
You can switch the displayed values from kilometres to miles
by holding down button “–” and briefly pressing the
On/Off button 1 .
The versions of the subsystems can be displayed for the pur-
poses of servicing. With the system switched off, simultane-
ously press buttons “–” and “+” and then press the On/Off
button 1.
The USB socket is reserved for connecting diagnostic sys-
tems. The USB socket does not have any other function.
The USB connection must always be completely sealed
with the protective cap 8.
Action Buttons Duration
Switch on on-board computer
Any
Switch off on-board computer
Any
Increase assistance
+
Decrease assistance
Display “TRIP”, “TOTAL”, “RANGE”,
assistance modes
Switch on bike lights +
Switch off bike lights
+
Reset trip distance
–+
Activate push assistance
Perform push assistance
WALK
+
1.
2. Any
Switch from kilometres to miles 1. Hold
2.
Display the versions
1)2)
–+ 1. Hold
2.
1) The eBike system must be switched off.
2) The information is shown as scrolling text.
OBJ_BUCH-2819-001.book Page 3 Wednesday, April 13, 2016 3:29 PM
12


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Bosch Purion Active Line at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Bosch Purion Active Line in the language / languages: English, German, Dutch, Danish, French, Italian, Portuguese, Swedish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 22,83 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info