Manual Bosch PUE611BB1E (page 17 of 24) (English)

746107

Zoom out

Zoom in

1/24

en Basic settings

--------

To access the basic settings:

The hob must be off.

1. Switch on the hob.

2. Within ten seconds, touch and hold the D symbol

for approximately four seconds.

The first four displays provide product information.

Touch the @ or A symbol to view the individual

displays.

3. Touching the D symbol again takes you to the

basic settings.

™ and ‚ flash alternately on the displays and ‹

appears as a presetting.

4. Touch the D symbol repeatedly until the required

function is displayed.

5. Then use the @ and A symbols to select the

required setting.

6. Touch the D symbol for at least four seconds.

The settings have been saved.

Leaving the basic settings

Turn off the hob with the main switch.

™‹

Restore to standard settings

‹ Individual settings.*

‚ Restore factory settings.

*Factory setting

**The hob's maximum power output is shown on the rating plate.

Product information Display screen

After-sales service index (ASSI)

‹‚

Production number

”š

Production number 1

Š†.

Production number 2

‹.†

Cookware check en

tCookware check

Cook war e chec k

This function can be used to check the speed and

quality of the cooking process depending on the

cookware.

The result is a reference value and depends on the

properties of the cookware and the hotplate being used.

1. Place a cold saucepan containing approx. 200 ml of

water in the centre of the hotplate the diameter of

which matches the base of the pan most closely.

2. Go to the basic settings and select the ™‚ ƒ setting.

3. Touch the @ or A symbol. A will flash on the hotplate

display.

The function has now been enabled.

After 20 seconds, the quality and speed of the cooking

process will appear in the hotplate display.

Check the result using the following table:

To activate the function again, select the

@ or A symbol.

Notes

■ If the diameter of the hotplate used is much smaller

than the diameter of the cookware, only the middle

of the cookware can be expected to heat up. This

may result in the cooking results not being as good

as expected or being less than satisfactory.

■ You can find information on this function in the

section on ~ "Basic settings".

■ You can find information on the type, size and

positioning of the cookware in the section on

~ "Induction cooking".

hPower manager

Power manager

You can use the power manager function to set the

total power of the hob.

The hob settings are preconfigured at the factory. Its

maximum performance is specified on the rating plate.

You can use the power manager function to change the

value to meet the requirements of the specific electrical

installation.

In order not to exceed this set value, the hob

automatically distributes the power available according

to need between the cooking zones that are switched

on.

While the power manager function is activated, the

output of a cooking zone may temporarily fall below the

nominal value. If a cooking zone is switched on and the

power limit is reached,

¬ appears in the power level

display for a short time. The appliance automatically

regulates and selects the highest possible power level.

Note: If automatic power limitation has been activated,

the appliance self-regulates but continues to display the

selected power level unchanged.

For more information about how the total power of the

hob is changed, see the section entitled ~ "Basic

settings"

Result

‹

The cookware is not suitable for the hotplate and will therefore

not heat up.*

‚

The cookware is taking longer to heat up than expected and the

cooking process is not going as well as it should.*

The cookware is heating up correctly and the cooking process

is going well.

* If there is a smaller hotplate available, test the cookware again on the

smaller hotplate.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Bosch PUE611BB1E in the language / languages: English as an attachment in your email.

The manual is 1,77 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Bosch PUE611BB1E

Bosch PUE611BB1E User Manual - German - 24 pages

Bosch PUE611BB1E User Manual - Dutch, Italian - 48 pages

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Bosch PUE611BB1E Manual

Product: