382548
12
Zoom out
Zoom in
Previous page
1/72
Next page
English4
2 609 932 299 • (03.03) T
For sawing close to edges, the foot plate can be offset
to the rear.
With the base plate repositioned, the cutting angle
cannot be changed.
The circle cutter/parallel guide 22 as well as the
splintering protector 15 cannot be used.
PST 650 PE/PST 750 PE
Unscrew the screw 17 completely. Lift off the base
plate and reposition so that the screw 17 with the re-
tainer 21 fits in the front cut-out 20 of the base plate
and can be screwed into the threaded hole 19.
Before tightening the screw 17, press the base plate
to the rear until it latches.
PST 850 PE
Swing the clamping lever 5 out of the base plate 6 and
loosen the base plate by turning the clamping lever
anti-clockwise.
Slide the base plate 6 to the stop in the direction of the
blow-out opening.
Retighten the clamping lever 5 by turning clockwise
and swing back into the base plate. Take care that the
clamping lever is completely sunk into the base
plate 6.
To prevent the splintering of the surface when sawing
wood, insert the splintering protector into the base
plate 6 from below.
The splintering protector can be used only with certain
types of saw blades.
After working for a long period with a low stroke rate,
allow the machine to cool by running for approx.
3 minutes without a saw blade and at maximum stroke
rate.
For narrow curves, use a thin saw blade.
When sawing metal or similar material, apply a cooling
or lubricating agent along the cutting line.
/ Parallel Guide/Circle Cutter
(Accessory)
Maximum material thickness: 30 mm
Plunge Sawing
Plunge cutting may be used only on soft materi-
als such as wood, aerated concrete, gypsum
plaster boards, etc.!
Use only short saw blades.
Place the front edge of the base plate on the work-
piece and switch on. Press the machine firmly against
the workpiece and plunge the saw blade slowly into
the workpiece.
As soon as the complete surface of the base plate
rests on the work piece, continue to saw along the
cutting line.
/ Offsetting the Foot Plate
Splintering Protector
D E
B
Tips
F G
H
12


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Bosch pst 750 pe at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Bosch pst 750 pe in the language / languages: English, German, Dutch, Danish, French, Italian, Portuguese, Swedish, Turkish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 2,67 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info