Manual Bosch pst 14 4 (page 10 of 71) (English, German, Dutch, Danish, French, Italian, Portuguese, Swedish, Turkish, Spanish, Norwegian, Finnish)

382458

Zoom out

Zoom in

1/71

English - 2

■ The cutting path must be free of obstacles both

above and below.

■ When sawing, the complete surface of the

base plate 6 must be in secure contact.

■ After finishing the working procedure, switch

the machine off and activate the switch lock 1

(press at symbol). Wait until the saw blade

has stopped before pulling it from the cut and

placing the machine down (danger of kick-

back).

■ Always switch the machine off before placing it

down.

■ Use only sharp, flawless saw blades. Change

cracked, bent or dull saw blades immediately.

■ Never allow children to use the machine.

■ Bosch is only able to ensure perfect operation

of the machine if the original accessories in-

tended for it are used.

Battery and Battery Charger

■ The enclosed operating instructions for the

battery charger must be read carefully!

■ The battery and battery charger are designed

to match each other. When charging the bat-

tery, use only a Bosch battery charger de-

signed for it with a charging voltage that corre-

sponds with the battery (see type plate). Com-

bining different rated voltages causes damage

to the battery charger.

■ Allow a heated battery to cool before charging.

■ Protect the battery from heat and fire: Danger

of explosion! Do not place the battery on radi-

ators or expose to strong sun rays for a longer

time; temperatures over 50 °C cause damage.

■ Do not open the battery, and protect it from im-

pact. Store in a dry and frost-free place.

■ Cover the contacts of a removed battery. Dan-

ger of fire results when shorted by a metal ob-

ject!

■ Do not dispose of the battery in household

waste or discard into fire or water.

Battery Charging

A battery that is new or has not been used for a

longer period does not develop its full capacity

until after approximately 5 charging/discharging

cycles.

To remove the battery 3, press the unlocking but-

tons 4 and pull out the battery downwards. Do not

exert any force.

Please refer to the enclosed “Battery Charger” in-

structions for the operation of the battery charger

as well as for a description of the charging proc-

ess.

The battery is equipped with an NTC temperature

control which allows charging only within a tem-

perature range of between 0 °C and 45 °C.

A long battery service life is achieved in this man-

ner.

A significantly reduced working period after

charging indicates that the batteries are used and

must be replaced.

■ Observe the notes on environmental protec-

tion.

■ Before any work on the machine itself, re-

move the battery.

Inserting the Saw Blade (➊)

■ When inserting and changing the saw blade 9

we recommend wearing protective gloves.

Insert the saw blade (teeth in cutting direction)

into the stroke rod 12 until it latches; the SDS

clamping lever 10 pops back to the rear and the

saw blade is locked.

When inserting the saw blade, take care that the

rear edge of the saw blade comes to rest in the

groove of the guide roller 8.

Ejecting the Saw Blade (➋)

To eject the saw blade, turn the SDS lever 10 to

the front in the insertion position. The saw blade

is released and ejected.

Before Putting into Operation

Replacing/Inserting the Saw

Blade (see figure )

10 • 2 609 932 131 • 02.03

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Bosch pst 14 4 in the language / languages: English, German, Dutch, Danish, French, Italian, Portuguese, Swedish, Turkish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 2,19 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Bosch pst 14 4 Manual

Product: