Manual Bosch PSS 200 AC (page 17 of 97) (English, German, Dutch, Danish, French, Italian, Portuguese, Swedish, Turkish, Spanish, Norwegian, Finnish)

78275

Zoom out

Zoom in

1/97

English | 17

Bosch Power Tools 2 609 004 199 | (27.1.10)

Sanding sheets without holes, e. g. from rolls or

by the meter, can be punctured with the perfo-

rating tool 11 for use with dust extraction. For

this, press the machine with the mounted sand-

ing sheet onto the perforating tool

(see figure E).

To remove the sanding sheet 6, unlatch the

sanding-sheet clamp 4 and pull out the sanding

sheet.

Selecting the Sanding Sheet

Depending on the material to be worked and the

required rate of material removal, different

sanding sheets are available:

Dust/Chip Extraction

f Dusts from materials such as lead-containing

coatings, some wood types, minerals and

metal can be harmful to one’s health. Touch-

ing or breathing-in the dusts can cause aller-

gic reactions and/or lead to respiratory infec-

tions of the user or bystanders.

Certain dusts, such as oak or beech dust, are

considered as carcinogenic, especially in

connection with wood-treatment additives

(chromate, wood preservative). Materials

containing asbestos may only be worked by

specialists.

– Use dust extraction whenever possible.

– Provide for good ventilation of the work-

ing place.

– It is recommended to wear a P2 filter-

class respirator.

Observe the relevant regulations in your

country for the materials to be worked.

Integrated Dust Extraction with Dust Box

(see figures C1–C4)

Attach the dust box 3 onto the extraction outlet

8 until it latches.

To empty the dust box 3, pull off the dust box

downward.

Before opening the dust box 3, it is recommend-

ed to loosen the dust from the filter element by

gently striking it against a firm support (as

shown in the figure).

Grasp the dust box 3 by the recessed grip, fold

the filter element 9 upward and empty the dust

box. Clean the thin plates of the filter element 9

with a soft brush.

External Dust Extraction (see figure D)

Insert a vacuum hose 10 onto the extraction out-

let 8. Connect the vacuum hose 10 to a vacuum

cleaner. See the overview for connecting to var-

ious vacuum cleaners at the end of these oper-

ating instructions.

The vacuum cleaner must be suitable for the ma-

terial being worked.

When vacuuming dry dust that is especially det-

rimental to health or carcinogenic, use a special

vacuum cleaner.

Grain size

For the working of all

wooden materials

40—240

For coarse-sanding,

e. g. of rough, un-

planed beams and

boards coarse 40, 60

For face sanding and

planing small irregu-

larities

medi-

um 80, 100, 120

For finish and fine

sanding of hard

woods fine 180, 240

For the working of

paint/enamel coats

or primers and fillers

40—320

For sanding off paint coarse 40, 60

For sanding primer medi-

um 80, 100, 120

For final sanding of

primers before coat-

ing fine 180, 240, 320

OBJ_BUCH-60-003.book Page 17 Wednesday, January 27, 2010 2:49 PM

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Bosch PSS 200 AC in the language / languages: English, German, Dutch, Danish, French, Italian, Portuguese, Swedish, Turkish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 3,69 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Bosch PSS 200 AC Manual

Product: