Manual Bosch pss 180 a (page 8 of 49) (English, German, Dutch, Danish, French, Italian, Portuguese, Swedish, Turkish, Spanish, Norwegian, Finnish)

389368

Zoom out

Zoom in

1/49

English - 2

■ Always switch the machine off and wait until it

has come to a standstill before placing it down.

■ Never allow children to use the machine.

■ Bosch is only able to ensure perfect operation

of the machine if the original accessories in-

tended for it are used.

■ Before any work on the machine itself, pull

the mains plug.

Selecting the Sanding Sheet

Depending on the material to be worked, different

sanding sheet qualities are to be used:

for the working of all wooden materials.

for the working of paint/enamel coats or primers

and fillers.

Replacing the Sanding Sheet

Before placing on a new sanding sheet, free the

sanding plate from dust and dirt.

Slightly lift sanding-sheet clamp 1 and detach.

First insert the sanding sheet at the rear to the

stop and reattach the sanding-sheet clamp 1

again.

Make sure that the sanding sheet 6 lies taught on

the sanding plate. Wrap the sanding sheet round

and clamp tightly at the front end in the same

manner.

To ensure optimum dust extraction, the holes of

the sanding sheet must match with those of the

sanding plate.

Sanding sheets without holes, e. g. from rolls or

by the meter, can be punctured with the perforat-

ing tool 12* for use with dust extraction (see

figure ).

Internal Vacuuming with Dust Box

(see figure )

Attaching the dust box:

Attach the dust box onto the outlet piece 8 and al-

low it to snap in; take care that the holder 7

latches in the corresponding groove of the ma-

chine.

Emptying the dust box:

Actuate the latching lever 9 and pull off the dust

box.

Before opening the dust box, it is recommended

to loosen the dust from the filter element by strik-

ing against a hard surface.

Grasp the dustbox by the recessed grip, fold the

filter element (micro filtersystem) 10 upwards and

empty the dust box 4. Clean the thin plates of the

filter system with a soft brush.

Caution, fire hazard!

In unfavourable conditions, e. g. when

sparks emit from sanding metals, sand-

ing-debris in the dust bag, microfilter or

paper sack (or in the filter sack or filter

of the wet/dry vacuum cleaner) can self-

ignite. Particularly when mixed with re-

mainders of varnish, polyurethane or

other chemical materials and when the

sanding debris is hot after long periods

of working.

Avoid overheating the object being

sanded as well as the power tool, and al-

ways empty the dust collector before

breaks.

If your tool is equipped with a dust bag, empty it

frequently and after completion of sanding.

Be particularly careful when disposing of dust, as

materials in fine particle form may be explosive.

Do not throw sanding dust on an open fire. Spon-

taneous combustion may in time, result from mix-

ture of oil or water with dust particles.

External Dust Extraction

(see figure )

Slide the extraction adapter 11 onto the outlet

piece 8 and make sure that the latches engage.

To remove, press the latches together at the rear

and pull off the extraction adapter.

The vacuum cleaner must be suitable for the ma-

terial to be worked.

When vacuuming dry dust that is especially detri-

mental to health or carcinogenic, use a special

vacuum cleaner.

Replacing the Sanding Sheet

Dust/Chip Extraction

A1-A4

8 • 2 609 932 212 • TMS • 18.03.03

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Bosch pss 180 a in the language / languages: English, German, Dutch, Danish, French, Italian, Portuguese, Swedish, Turkish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 1,45 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Bosch pss 180 a Manual

Product: