Manual Bosch PSR9,6VE_2 (page 11 of 67) (English, German, French, Italian, Spanish)

16622

Zoom out

Zoom in

1/67

English - 3

Fully Automatic Spindle Locking

(Auto-Lock)

The drill spindle is locked when the On/Off

switch 4 is not pressed.

This makes quick and easy changing of the tool

in the drill chuck possible.

Reversing the Rotational Direction

Operate the rotational direction

switch 5 only at a standstill.

The rotational direction

switch 5 is used to re-

verse the rotational direc-

tion of the machine. How-

ever, this is not possible

with the On/Off switch 4

actuated.

Right Rotation ( )

Turn the rotational direction switch through to the

left stop (normal operation: drilling, screwdriving,

etc.).

Left Rotation ( )

Press the rotational direction switch through to

the right stop (for loosening and unscrewing

screws and nuts).

Setting the Torque

With the correct setting, the clutch disengages as

soon as the screw is driven flush into the material

or the set torque is reached. Select a higher set-

ting when driving out screws, or set to the “Drill-

ing” symbol.

Low setting, e. g., small screws, soft

materials.

High setting, e. g., large screws, hard

materials.

Drilling

Set the torque setting ring 2 to the “Drill-

ing” symbol.

The display 10 is activated when the battery 7 is

inserted.

After a while the display switches to the stand-by

mode. The display 10 can be activated again by

inserting the battery 7 or by pressing one of the

two push-button keys on the display.

For temperatures below 0 °C the function of the

display is limited.

Warning Indicators (see figure )

The function of the warning indicators is also op-

erative in stand-by mode.

➊ The battery is almost empty:

➯ Recharge the battery.

➋

The motor is starting to overheat:

➯ Switch the machine off and allow to cool

down. Alternatively, run the machine at full

speed without load until the warning indicator

goes out.

Adjustment Aid

The display is for guidance. The settings are to

be checked by carrying out a practical test.

Material Selection (see figure )

Select the material to be worked by (multiple)

pressing of the left push-button key:

➌ Steel

➍ Softwood

➎ Hardwood

Shown in the example: Hardwood.

Application Selection (see figure )

Select the application by (multiple) pressing of

the right push-button key:

➏+➑ Driving in screws (4 Diameter ranges)

➐+➑ Drilling holes (2 Diameter ranges)

Recommendation (see figure )

The indication gives a recommendation for the

optimum setting of your cordless screwdriver. Ad-

just the proposed values on your cordless screw-

driver.

➒ 1st gear/2nd gear

➓ Torque range (Level 1 – 5, 5 – 15,

15 – 25, “Drilling”)

Shown in the example: 2nd gear; Torque

range 5 – 15.

Cordless Screwdriver Display

2 609 932 287 - Buch Seite 3 Mittwoch, 22. Oktober 2003 1:58 13

11 • 2 609 932 287 • 03.10

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Bosch PSR9,6VE_2 in the language / languages: English, German, French, Italian, Spanish as an attachment in your email.

The manual is 2,53 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Bosch PSR9,6VE_2 Manual

Product: