Manual Bosch PSR9,6VE_2 (page 10 of 67) (English, German, French, Italian, Spanish)

16622

Zoom out

Zoom in

1/67

English - 2

■ Convince yourself before using that the battery

is securely seated in the machine.

■ Use appropriate detectors to determine if

utility lines are hidden in the work area or

call the local utility company for assist-

ance.

Contact with electric lines can lead to fire and

electric shock. Damaging a gas line can lead

to explosion. Penetrating a water line causes

property damage.

■ Hold the machine tightly: When driving in

screws, high reaction moments can briefly oc-

cur.

■ Secure the workpiece. A workpiece clamped

with clamping devices or in a vice is held more

secure than by hand.

■ Never allow children to use the machine.

■ Bosch is only able to ensure perfect operation

of the machine if the original accessories in-

tended for it are used.

Battery and Battery Charger

■ The enclosed operating instructions for the

battery charger must be read carefully!

■ Do not open the battery, and protect it from im-

pact. Store in a dry and frost-free place.

■ Allow a heated battery to cool before charging.

■ Protect the battery from heat and fire: Danger

of explosion! Do not place the battery on radi-

ators or expose to strong sun rays for a longer

time; temperatures over 50 °C cause damage.

■ Do not dispose of the battery in household

waste or discard into fire or water.

Battery Charging

A battery that is new or has not been used for a

longer period does not develop its full capacity

until after approximately 5 charging/discharging

cycles.

To remove the battery 7, press the unlocking but-

tons 8 and pull out the battery downwards. Do not

exert any force.

The battery is equipped with an NTC temperature

control which allows charging only within a tem-

perature range of between 0 °C and 45 °C. A long

battery service life is achieved in this manner.

A significantly reduced working period after

charging indicates that the batteries are used and

must be replaced.

■ Observe the notes on environmental protec-

tion.

Open the drill chuck 3 by turning until the tool can

be inserted. Insert the tool.

Firmly tighten the sleeve of the keyless chuck 3

by hand. This automatically locks the chuck.

Rotate the sleeve in the reverse direction to re-

move the tool.

Screwdriving (see figure )

Directly clamp the screwdriver bit 6 into the drill

chuck or use the additional universal bit holder 12

when operating with hex shank bits 11.

Inserting the Battery

Set the rotational direction switch 5 to the centre

position = lock-off and allow the charged bat-

tery 7 to engage into the handle.

Switching On and Off

To start the machine, press the On/Off switch 4

and keep it depressed.

The machine runs with variable

speed between 0 and maximum,

depending on the pressure applied

to the On/Off switch 4. Light pres-

sure results in a low rotational

speed thus allowing smooth, con-

trolled starts. Do not strain the ma-

chine so heavily that it comes to a

standstill.

To switch off the machine, release the On/Off

switch 4.

Gear Selection, Mechanical

Two speed ranges can be preselected with the

gear selector 1:

1st gear: Low rotational speed, high power.

2nd gear: High rotational speed, less power.

The speed settings may only be changed when

the machine is motionless. If the speed setting

has not quite notched in properly, briefly press

the On/Off switch 4.

Before Putting into Operation

Changing the Tool

Initial Operation

2 609 932 287 - Buch Seite 2 Mittwoch, 22. Oktober 2003 1:58 13

10 • 2 609 932 287 • 03.10

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Bosch PSR9,6VE_2 in the language / languages: English, German, French, Italian, Spanish as an attachment in your email.

The manual is 2,53 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Bosch PSR9,6VE_2 Manual

Product: