473377
14
Zoom out
Zoom in
Previous page
1/92
Next page
14 | English 2 609 001 965 11.10.06
Functional Description
Read all safety warnings and all
instructions. Failure to follow the warn-
ings and instructions may result in electric
shock, fire and/or serious injury.
Intended Use
The machine is intended for driving in and loosening
screws as well as for drilling in wood, metal, ceramic
and plastic.
Product Features
The numbering of the product features refers to the
illustration of the machine on the graphics page.
1 Keyless chuck
2 Torque preselection ring
3 Gear selector
4 Indicator for right rotation
5 Indicator for left rotation
6 Soft grip
7 Screwdriver bit*
8 Battery unlocking button
9 Battery*
10 “Power Light”
11 Rotational direction switch
12 On/Off switch
13 Universal bit holder*
14 Securing screw for keyless chuck
15 Allen Key**
*The accessories illustrated or described are not
included as standard delivery.
**Commercially available (not included in the delivery
scope)
Declaration of Conformity
We declare under our sole responsibility that this prod-
uct is in conformity with the following standards or
standardization documents: EN 60745 according to
the provisions of the directives 89/336/EEC,
98/37/EC.
19.09.2006, Robert Bosch GmbH, Power Tools Division
D-70145 Leinfelden-Echterdingen
Technical Data
Noise/Vibration Information
Measured values determined according to EN 60745.
Typically the A-weighted sound pressure level of the
machine is lower than des 70 dB(A).
While working, the noise level can exceed 85 dB(A).
Wear hearing protection!
Overall vibrational value (vector sum of three direc-
tions) determined according to EN 60745:
Drilling in metal: Vibrational emission value
a
h
=<2.5 m/s
2
, uncertainty K=1 m/s
2
,
Screwdriving: Vibrational emission value
a
h
=<2.5 m/s
2
, uncertainty K=1 m/s
2
.
Dr. Egbert Schneider
Senior Vice President
Engineering
Dr. Eckerhard Strötgen
Head of Product
Certification
Cordless Screwdriver PSR 12-2 PSR 14,4-2 PSR 18-2
Article number 3 603 J51 5.. 3 603 J51 4.. 3 603 J51 3..
Rated voltage V= 12 14,4 18
No-load speed
–1st gear
–2nd gear
rpm
rpm
0390
0–1250
0–400
0–1250
0–400
0–1250
Max. torque for hard/soft screwdriving applica-
tion according to ISO 5393 Nm 30/17 36/22 44/28
Max. screw dia. mm 8 8 10
Max. drilling dia.
–Steel
Wood
mm
mm
10
30
10
35
12
40
Chuck clamping range mm 0–10 0–10 0–10
Drill spindle thread ½" ½" ½"
Weight according to EPTA-Procedure 01/2003 kg 1.65 1.75 2.00
Please observe the article number on the type plate of your machine. The trade names of the individual machines may vary.
OBJ_BUCH-213-001.book Page 14 Wednesday, October 11, 2006 8:37 AM
14


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Bosch PSR12-2 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Bosch PSR12-2 in the language / languages: English, German, Dutch, Danish, French, Italian, Portuguese, Swedish, Turkish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 3,4 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info