Manual Bosch PSR 1800 LI 2 Systeembox (page 15 of 191) (English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Turkish, Spanish, Norwegian)

766852

Zoom out

Zoom in

1/191

English | 15

Operation

Starting Operation

Inserting the battery

Note: The use of batteries unsuitable for your power tool can

lead to malfunctions or damage to the power tool.

Set the rotational direction switch (11) to the middle posi-

tion to avoid unintentionally switching it on. Insert the

charged battery (8) into the handle until you feel it engage

and it is flush with the handle.

Set the rotational direction (see figureC)

The rotational direction switch (11) is used to change the ro-

tational direction of the power tool. However, this is not pos-

sible while the on/off switch (12) is being pressed.

Right rotation: To drill and to drive in screws, press the ro-

tational direction switch (11) through to the left stop.

The rotational direction indicator for right rotation

(5) lights up when the on/off switch (12) is

pressed and the motor is running.

Left Rotation: To loosen and unscrew screws and nuts,

press the rotational direction switch (11) through to the

right stop.

The rotational direction indicator for left rotation

(6) lights up when the on/off switch (12) is

pressed and the motor is running.

Preselecting the Torque

The torque presetting ring (3) can be used to preselect the

required torque in 20 stages. When the correct setting is

used, the application tool will be stopped when the screw is

driven flush into the material or once the set torque has been

reached. In position the overload clutch is deactivated,

e.g. for drilling.

When unscrewing screws, you can select a higher setting or

set the tool to the symbol.

Mechanical gear selection

uOnly operate the gear selector (4) when the power

tool is not in use.

You can preselect two speed ranges with the gear selector

(4).

Gear I:

Low speed range; for screwdriving or working with a large

drilling diameter.

Gear II:

High speed range; for working with a small drilling diameter.

If the gear selector switch (4) cannot be pushed all the way,

turn the tool holder (1) with the application tool slightly.

Temperature-dependent overload protection

In normal conditions of use, the power tool cannot be over-

loaded. If the power tool is overloaded or the permitted bat-

tery temperature is exceeded, the electronics of the power

tool will switch off until the temperature returns to within the

optimum operating temperature range.

Switching on/off

To start the power tool, press and hold the on/off switch

(12).

The lamp (9) lights up when the on/off switch (12) is lightly

or fully pressed, meaning that the work area is illuminated in

poor lighting conditions.

To switch off the power tool, release the on/off switch (12).

Adjusting the Speed

You can adjust the speed of the power tool when it is on by

pressing in the on/off switch (12) to varying extents.

A light pressure on the on/off switch (12) results in a low ro-

tational speed. Increased pressure on the switch causes an

increase in speed.

Practical advice

uOnly apply the power tool to the screw/nut when the

tool is switched off. Rotating tool inserts can slip off.

After working at a low speed for an extended period, you

should operate the power tool at the maximum speed for ap-

proximately three minutes without load to cool it down.

Maintenance and Service

Maintenance and Cleaning

uRemove the battery from the power tool before carry-

ing out work on the power tool (e.g. maintenance,

changing tool, etc.). The battery should also be re-

moved for transport and storage. There is risk of injury

from unintentionally pressing the on/off switch.

uTo ensure safe and efficient operation, always keep

the power tool and the ventilation slots clean.

Clean the application tool, the tool holder, the power tool’s

ventilations slots, and the battery’s ventilation slots each

time after using.

After-Sales Service and Application Service

Our after-sales service responds to your questions concern-

ing maintenance and repair of your product as well as spare

parts. You can find explosion drawings and information on

spare parts at: www.bosch-pt.com

The Bosch product use advice team will be happy to help you

with any questions about our products and their accessor-

ies.

In all correspondence and spare parts orders, please always

include the 10‑digit article number given on the nameplate

of the product.

Great Britain

Robert Bosch Ltd. (B.S.C.)

P.O. Box 98

Broadwater Park

North Orbital Road

Denham Uxbridge

UB 9 5HJ

At www.bosch-pt.co.uk you can order spare parts or arrange

the collection of a product in need of servicing or repair.

Bosch Power Tools 1 609 92A 6DG | (07.06.2021)

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Bosch PSR 1800 LI 2 Systeembox in the language / languages: English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Turkish, Spanish, Norwegian as an attachment in your email.

The manual is 3,23 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Bosch PSR 1800 LI 2 Systeembox Manual

Product: