Manual Bosch PSR 12-2 (page 13 of 92) (English, German, Dutch, Danish, French, Italian, Portuguese, Swedish, Turkish, Spanish, Norwegian, Finnish)

78260

Zoom out

Zoom in

1/92

English | 132 609 001 965 • 11.10.06

d) Store idle power tools out of the reach of

children and do not allow persons unfamil-

iar with the power tool or these instruc-

tions to operate the power tool. Power tools

are dangerous in the hands of untrained users.

e) Maintain power tools. Check for misalign-

ment or binding of moving parts, breakage

of parts and any other condition that may

affect the power tool’s operation. If dam-

aged, have the power tool repaired before

use. Many accidents are caused by poorly main-

tained power tools.

f) Keep cutting tools sharp and clean. Prop-

erly maintained cutting tools with sharp cutting

edges are less likely to bind and are easier to

control.

g) Use the power tool, accessories and tool

bits etc. in accordance with these instruc-

tions, taking into account the working con-

ditions and the work to be performed. Use

of the power tool for operations different from

those intended could result in a hazardous situ-

ation.

5) Battery tool use and care

a) Recharge only with the charger specified

by the manufacturer. A charger that is suita-

ble for one type of battery pack may create a risk

of fire when used with another battery pack.

b) Use power tools only with specifically des-

ignated battery packs. Use of any other bat-

tery packs may create a risk of injury and fire.

c) When battery pack is not in use, keep it

away from other metal objects, like paper

clips, coins, keys, nails, screws or other

small metal objects, that can make a con-

nection from one terminal to another.

Shorting the battery terminals together may

cause burns or a fire.

d) Under abusive conditions, liquid may be

ejected from the battery; avoid contact. If

contact accidentally occurs, flush with

water. If liquid contacts eyes, additionally

seek medical help. Liquid ejected from the

battery may cause irritation or burns.

6) Service

a) Have your power tool serviced by a quali-

fied repair person using only identical

replacement parts. This will ensure that the

safety of the power tool is maintained.

Machine-specific

Safety Warnings

f Hold the machine with a firm grip. High reaction

torque can briefly occur while driving in and loosen-

ing screws.

f Use appropriate detectors to determine if util-

ity lines are hidden in the work area or call the

local utility company for assistance. Contact

with electric lines can lead to fire and electric shock.

Damaging a gas line can lead to explosion. Pene-

trating a water line causes property damage or may

cause an electric shock.

f Switch off the power tool immediately when

the tool insert jams. Be prepared for high

reaction torque that can cause kickback. The

tool insert jams when:

— the power tool is subject to overload or

— it becomes wedged in the workpiece.

f Hold the machine only by the insulated grip-

ping surfaces, when performing an operation

where the cutting tool may run into hidden

wiring. Contact with a “live” wire will make exposed

metal parts of the tool “live” and shock the operator.

f Secure the workpiece. A workpiece clamped

with clamping devices or in a vice is held more

secure than by hand.

f Do not work materials containing asbestos.

Asbestos is considered carcinogenic.

f Take protective measures when dust can

develop during working that is harmful to

one’s health, combustible or explosive. Exam-

ple: Some dusts are regarded as carcinogenic.

Wear a dust mask and work with dust/chip extrac-

tion when connectable.

f Keep your workplace clean. Blends of materials

are particularly dangerous. Dust from light alloys

can burn or explode.

f Always wait until the machine has come to a

complete stop before placing it down. The tool

insert can jam and lead to loss of control over the

power tool.

f Avoid unintentional switching on. Ensure the

On/Off switch is in the off position before

inserting battery pack. Carrying the power tool

with your finger on the On/Off switch or inserting

the battery pack into power tools that have the

switch on invites accidents.

f Do not open the battery. Danger of short-

circuiting.

f Protect the battery against heat, e. g., also

against continuous sun irradiation and fire.

There is danger of explosion.

OBJ_BUCH-213-001.book Page 13 Wednesday, October 11, 2006 8:37 AM

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Bosch PSR 12-2 in the language / languages: English, German, Dutch, Danish, French, Italian, Portuguese, Swedish, Turkish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 3,31 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Bosch PSR 12-2 Manual

Product: