Manual Bosch PSR 10,8 LI-2 (page 12 of 100) (English, German, Dutch, Danish, French, Italian, Portuguese, Swedish, Turkish, Spanish, Norwegian, Finnish)

460545

Zoom out

Zoom in

1/100

12 | English

2 609 004 660 | (27.4.10) Bosch Power Tools

f Switch off the power tool immediately

when the tool insert jams. Be prepared for

high reaction torque that can cause kick-

back. The tool insert jams when:

— the power tool is subject to overload or

— it becomes wedged in the workpiece.

f Hold the machine with a firm grip. High re-

action torque can briefly occur while driving

in and loosening screws.

f Secure the workpiece. A workpiece clamped

with clamping devices or in a vice is held

more secure than by hand.

f Keep your workplace clean. Blends of mate-

rials are particularly dangerous. Dust from

light alloys can burn or explode.

f Do not open the battery. Danger of short-

circuiting.

Protect the battery against heat, e. g.,

against continuous intense sunlight,

fire, water, and moisture. Danger of

explosion.

f In case of damage and improper use of the

battery, vapours may be emitted. Provide

for fresh air and seek medical help in case

of complaints. The vapours can irritate the

respiratory system.

f Use the battery only in conjunction with

your Bosch power tool. This measure alone

protects the battery against dangerous over-

load.

f Use only original Bosch batteries with the

voltage listed on the nameplate of your

power tool. When using other batteries, e. g.

imitations, reconditioned batteries or other

brands, there is danger of injury as well as

property damage through exploding batter-

ies.

Additional Safety and Working

Instructions

f Dusts from materials such as lead-contain-

ing coatings, some wood types, minerals

and metal can be harmful to one’s health

and cause allergic reactions, lead to respi-

ratory infections and/or cancer. Materials

containing asbestos may only be worked by

specialists.

– Provide for good ventilation of the work-

ing place.

– It is recommended to wear a P2 filter-

class respirator.

Observe the relevant regulations in your

country for the materials to be worked.

f Before any work on the machine (e. g.,

maintenance, tool change, etc.) as well as

during transport and storage, set the rota-

tional direction switch to the centre posi-

tion. Unintentional actuation of the On/Off

switch can lead to injuries.

f The battery is supplied partially charged. To

ensure full battery capacity, completely

charge the battery in the battery charger

before using for the first time.

f Read the operating instructions of the bat-

tery charger.

f Apply the power tool to the screw only

when it is switched off. Rotating tool inserts

can slip off.

f Adjust the gear switch only when the ma-

chine is at a complete stop.

f If the gear switch cannot be pushed to the

stop, turn the drill chuck a little.

f The battery charge-control indicator indi-

cates the charge condition of the battery

for a few seconds when the On/Off switch

is pressed half or fully through. It consists

of a three-colour illuminating LED.

LED Capacity

Continuous lighting, green

≥ 66%

Continuous lighting, orange

33—66%

Continuous lighting, red

11—33%

Flashing light, red

≤ 11%

OBJ_BUCH-1196-001.book Page 12 Tuesday, April 27, 2010 12:57 PM

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Bosch PSR 10,8 LI-2 in the language / languages: English, German, Dutch, Danish, French, Italian, Portuguese, Swedish, Turkish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 4,79 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Bosch PSR 10,8 LI-2 Manual

Product: