78257
19
Zoom out
Zoom in
Previous page
1/120
Next page
English | 192 609 002 333 6.6.07
Technical Data
Assembly
Dust/Chip Extraction
f Use the dust/chip extraction only when work-
ing concrete, brick and brickwork. Wood or
plastic chips can easily lead to clogging.
f WARNING Fire hazard! Do not work metallic
materials with the extraction device mounted.
Hot metal chips can ignite parts of the extraction
device.
To achieve optimum extraction results, please observe
the following notes:
Pay attention that the extraction device faces flush
against the workpiece or the wall. This also makes
drilling at a right angle easier.
When using the extraction device, always work with
the maximum speed.
Impact Drill PSB 700-2 RE PSB 780-2 RE PSB 800-2 RA PSB 1000-2 RCA
PSB 1000-2 RCE
Article number 3 603 A72 5.. 3 603 A72 7.. 3 603 A72 7.. 3 603 A72 8..
Rated power input W 701 800 800 1010
Output power W 360 420 420 530
No-load speed
–1st gear
–2nd gear
rpm
rpm
0–800
0–2600
0–1100
0–2800
0–1100
0–2800
0–1100
0–2800
Impact rate bpm 44200 47600 47600 47600
Rated torque
(1st/2nd gear/position “S”) Nm 4.4/1.3/ 2.9/1.2/ 2.9/1.2/ 2.6/1.0/2.6
Torque at max. output power
(1st/2nd gear/position “S”)
Nm 25/9/– 30/11/ 30/11/ 22
*
/9
*
/33
Speed preselection zzz z
Right/left rotation z z z z
Spindle collar dia. mm 43 43 43 43
Maximum drilling diameter
(1st/2nd gear)
–Brickwork
Concrete
–Steel
Wood
mm
mm
mm
mm
22/16
20/13
13/8
40/25
22/16
20/13
13/8
40/25
22/16
20/13
13/8
40/25
22/16
20/13
16/8
40/25
Max. screw dia. mm 81010 12
Chuck clamping range mm 1.513 1.5–13 1.5–13 1.5–13
Weight according to
EPTA-Procedure 01/2003 kg 2.4 2.4 2.4 2.4
Protection class /II /II /II /II
*
Electronic shut-off
The values given are valid for nominal voltages [U] of 230/240 V. For lower voltage and models for specific countries, these val-
ues can vary.
Please observe the article number on the type plate of your machine. The trade names of the individual machines may vary.
OBJ_DOKU-1584-006.fm Page 19 Wednesday, June 6, 2007 11:11 AM
19


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Bosch PSB 700-2 RE at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Bosch PSB 700-2 RE in the language / languages: English, German, Dutch, Danish, French, Italian, Portuguese, Swedish, Turkish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 6,55 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info