387166
13
Zoom out
Zoom in
Previous page
1/77
Next page
English | 132 609 002 311 8.5.07
Technical Data
Declaration of Conformity
We declare under our sole responsibility that this prod-
uct is in conformity with the following standards or
standardization documents: EN 60745 according to
the provisions of the directives 89/336/EEC,
98/37/EC.
25.04.2007, Robert Bosch GmbH, Power Tools Division
D-70745 Leinfelden-Echterdingen
Noise/Vibration Information
Measured values determined according to EN 60745.
Typically the A-weighted noise levels of the product
are: Sound pressure level 97 dB(A); Sound power
level 108 dB(A). Uncertainty K =3 dB.
Wear hearing protection!
Vibration total values (triax vector sum) determined
according to EN 60745:
Drilling into metal: Vibration emission value
a
h
=4.7 m/s
2
, Uncertainty K =1.5 m/s
2
,
Impact drilling into concrete: Vibration emission value
a
h
=24.2 m/s
2
, Uncertainty K =2.0 m/s
2
,
Screwdriving: Vibration emission value a
h
< 2.5 m/s
2
,
Uncertainty K =1.5 m/s
2
.
The vibration emission level given in
this information sheet has been meas-
ured in accordance with a standardised test given in
EN 60745 and may be used to compare one tool with
another.
The vibration emission level will vary because of the
ways in which a power tool can be used and may
increase above the level given in this information sheet.
This could lead to a significant underestimate of expo-
sure when the tool is used regularly in such a way.
Note: To be accurate, an estimation of the level of
exposure to vibration experienced during a given period
of work should also take into account the times when
the tool is switched off and when it is running but not
actually doing the job. This may significantly reduce the
exposure level over the total working period.
Assembly
f Before any work on the machine itself, pull
the mains plug.
Auxiliary Handle (see figure A)
f Operate your machine only with the auxiliary
handle 10.
The auxiliary handle 10 can be set to any position for a
secure and low-fatigue working posture.
Turn the wing bolt for adjustment of the auxiliary
handle 9 in anticlockwise direction and set the auxiliary
handle 10 to the required position. Then tighten the
wing bolt 9 again in clockwise direction.
Impact Drill PSB 500 RE PSB 550 RE
Article number 3 603 A26 0.. 3 603 A26 0..
Rated power input W 500 550
Output power W 228 270
No-load speed rpm503000503000
Rated speed rpm 2380 2246
Impact rate bpm 48000 48000
Rated torque Nm 0.9 1.2
Torque at max. output power Nm 7.5 7.5
Right/left rotation
Spindle collar dia. mm 43 43
Max. drilling dia.
Concrete
–Steel
Wood
mm
mm
mm
13
10
20
13
10
20
Chuck clamping range mm 2.0 13 2.0 13
Weight according to EPTA-Procedure 01/2003 kg 1.5 1.5
Protection class /II /II
The values given are valid for nominal voltages [U] of 230/240 V. For lower voltage and models for specific countries, these val-
ues can vary.
Please observe the article number on the type plate of your machine. The trade names of the individual machines may vary.
Dr. Egbert Schneider
Senior Vice President
Engineering
Dr. Eckerhard Strötgen
Head of Product
Certification
WARNING
OBJ_BUCH-365-001.book Page 13 Tuesday, May 8, 2007 2:47 PM
13


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Bosch psb 5500 re at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Bosch psb 5500 re in the language / languages: English, German, Dutch, Danish, French, Italian, Portuguese, Swedish, Turkish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 2,42 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info