Manual Bosch PSB 14 4 Vi (page 18 of 107) (English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Turkish, Spanish, Norwegian, Finnish)

473698

Zoom out

Zoom in

1/107

1 609 929 M27 | (7.8.07) Bosch Power Tools

18 | English

Assembly

Battery Charging

A battery that is new or has not been used for a

longer period does not develop its full capacity

until after approx. 5 charging/discharging cycles.

To remove the battery 8, press the battery un-

locking button 9 and pull the battery out of the

power tool toward the rear. Do not exert any

force.

The battery is equipped with a NTC temperature

control which allows charging only within a tem-

perature range of between 0 °C and 45 °C. A long

battery service life is achieved in this manner.

A significantly reduced working period after

charging indicates that the battery is used and

must be replaced.

Observe the notes for disposal.

Auxiliary Handle

f Before any work on the machine (e. g., main-

tenance, tool change, etc.) as well as during

transport and storage, set the rotational di-

rection switch to the centre position. Unin-

tentional actuation of the On/Off switch can

lead to injuries.

f Operate your machine only with the auxiliary

handle 12.

The auxiliary handle 12 can be set to any position

for a secure and low-fatigue working posture.

Turn the wing bolt for adjustment of the auxiliary

handle 11 in anticlockwise direction and set the aux-

iliary handle 12 to the required position. Then tight-

en the wing bolt 11 again in clockwise direction.

Adjusting the Drilling Depth (see figure A)

The required drilling depth X can be set with the

depth stop 13.

Press the button for the depth stop adjustment

10 and insert the depth stop into the auxiliary

handle 12.

Pull out the depth stop until the distance be-

tween the tip of the drill bit and the tip of the

depth stop correspond with the desired drilling

depth X.

Changing the Tool (see figure B)

f Before any work on the machine (e. g., main-

tenance, tool change, etc.) as well as during

transport and storage, set the rotational di-

rection switch to the centre position. Unin-

tentional actuation of the On/Off switch can

lead to injuries.

Hold the rear sleeve 3 of the keyless chuck 1 tight

and turn the front sleeve 2 in rotation direction

n, until the tool can be inserted. Insert the tool.

Hold the rear sleeve 3 of the keyless chuck 1 tight

and firmly turn the front sleeve 2 in rotation di-

rection o by hand until the locking action is no

longer heard. This automatically locks the drill

chuck.

The locking is released again to remove the tool

when the front sleeve 2 is turned in the opposite

direction.

Screwdriver Tools (see figure C)

When working with screwdriver bits 14, a univer-

sal bit holder 15 should always be used. Use only

screwdriver bits that fit the screw head.

For driving screws, always position the “Drill-

ing/Impact Drilling” selector switch 4 to the

“Drilling” symbol.

Replacing the Drill Chuck

f Before any work on the machine (e. g., main-

tenance, tool change, etc.) as well as during

transport and storage, set the rotational di-

rection switch to the centre position. Unin-

tentional actuation of the On/Off switch can

lead to injuries.

For machines without spindle lock, the drill

chuck must be replaced through an authorized

after-sales service agent for Bosch power tools.

The drill chuck must be tightened with a

tightening torque of approx. 30–35 Nm.

OBJ_BUCH-14-002.book Page 18 Tuesday, August 7, 2007 9:42 AM

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Bosch PSB 14 4 Vi in the language / languages: English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Turkish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 3,28 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Bosch PSB 14 4 Vi Manual

Product: