Manual Bosch PSB 1000 RCA (page 19 of 113) (English, German, Dutch, Danish, French, Italian, Portuguese, Swedish, Turkish, Spanish, Norwegian, Finnish)

78643

Zoom out

Zoom in

1/113

English | 19

Bosch Power Tools 1 609 929 M09 | (26.9.07)

To achieve optimum extraction results, please

observe the following notes:

– Pay attention that the extraction device faces

flush against the workpiece or the wall. This

also makes drilling at a right angle easier.

– When using the extraction device, always

work with the maximum speed.

– After reaching the desired drilling depth, pull

the drill bit out of the drill hole first and then

switch off the impact drill.

– Check the condition of the filter element 17

regularly. Replace a damaged filter element

immediately.

– The dust protection ring 14 can wear, espe-

cially when working with large drill-bit diame-

ters. Replace the dust protection ring when

worn/damaged.

Mounting the Extraction Device

Guide the extraction device 9 from the front to-

ward the bottom side of the impact drill. Pay at-

tention that the extraction device 9 faces flush

against the casing and that it is locked.

Cleaning the Extraction Device (see figure A)

Attach the locking latch 15 or empty the dust col-

lector 13 before placing down the extraction de-

vice.

The dust collector 13 is sufficient for approx. 20

drillings with a drilling diameter of 6 mm.

When the extraction force diminishes or when

the level indicator 18 is full, the dust collector 13

must be emptied. For this, press on the riffled

surface of the release button 12 and take off the

dust collector 13.

Empty and clean the dust collector 13. Clean the

filter element 17 by gently striking or tapping

against it.

Check the filter element 17 for damage and re-

place it as required.

For this, as an example, pry off the holder of the

filter element 17 (n) and change the filter ele-

ment 17 including the holder (o). When placing

on the holder again, make sure that the rubber

gasket is inserted.

Reattach the dust collector 13 again and lock it

by pressing against the smooth surface of the re-

lease button 12.

Removing the Extraction Device

For removal of the extraction device 9, push the

release button 16 to the right or left and pull off

the extraction device 9 toward the front.

Auxiliary Handle

f Operate your machine only with the auxiliary

handle 8.

The auxiliary handle 8 can be set to any position

for a secure and low-fatigue working posture.

Turn the wing bolt for adjustment of the auxiliary

handle 2 in anticlockwise direction and set the

auxiliary handle 8 to the required position. Then

tighten the wing bolt 2 again in clockwise direc-

tion.

Adjusting the Drilling Depth (see figure B–C)

With the extraction device mounted, the drilling

depth “X” can be adjusted.

Insert a drill bit into the drill chuck and clamp the

drill bit, see section “Changing the Tool”,

page 20. Rotate the collar for the depth stop 11

upward until it can be moved on the telescopic

guide 10. Place the machine, without switching it

on, firmly against the surface to be drilled until

the drill bit touches the surface.

Read the scale value of the telescopic guide 10

on the collar 11. Add this value to the requested

drilling depth X. Slide the collar 11 to the calcu-

lated scale value and then rotate the collar 11

downward to lock the determined clearance.

OBJ_BUCH-444-001.book Page 19 Wednesday, September 26, 2007 8:12 AM

Hoe can I dissemble Bosch PSB 1000 RCA impact drill? Submitted on 28-8-2021 at 20:12
Reply Report abuse

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Bosch PSB 1000 RCA in the language / languages: English, German, Dutch, Danish, French, Italian, Portuguese, Swedish, Turkish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 5,64 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Bosch PSB 1000 RCA Manual

Product: