Manual Bosch POF1300ACE (page 18 of 99) (English, German, Dutch, Danish, French, Italian, Portuguese, Swedish, Turkish, Spanish, Norwegian, Finnish)

23203

Zoom out

Zoom in

1/99

English - 6

Routing with Parallel Guide

(Accessory – see figures + )

Slide the parallel guide 30 with the guide rods 31

into the base plate 12 and tighten at the required

measure with the wing bolts 16.

Guide the machine with uniform feed and side-

ward pressure on the parallel guide 30 along the

edge of the workpiece.

Routing Circular Arc Profiles

(see figures + )

Reverse the parallel guide 30 (facing surfaces

point upwards) and insert the guide rods into the

base plate 12. Fasten centring pin 32 to parallel

guide (through hole) with wing bolt 33.

Puncture centring pin into marked centre of the

circular arc and guide router with consistent feed

across the workpiece surface.

Routing with the Curve Buffer

(see figures + )

Slide the parallel guide 30 with the guide rods 31

into the base plate 12. Fasten the curve buffer 34

with the guide roller mounted to the parallel

guide 30.

Guide the machine along the workpiece edge

with light sideward pressure.

Routing with the Router Compass

(Accessory – see figure )

Use the router compass/guide rail adapter 35

(accessory) for circular routing jobs.

Mount the router compass as shown in the figure.

Screw pointed centring screw 40 in thread. Insert

the point of the centring screw in the centre of the

circular arc to be milled and ensure that it en-

gages in the workpiece surface.

Coarse-adjust the required radius by positioning

the router compass, then tighten the locking

screws 37 and 38.

After loosening the locking screw 37, the router

compass can be reset with the fine adjustment

knob 39 (1 scale mark = 0.1 mm/1 rotation =

2.0 mm).

Lead the router over the workpiece, holding the

router with the right handle 19 and the additional

router compass handle 36.

Routing with Guide Rail

(Accessory – see figure )

Working with the guide rail 42 is possible only

with use of the guide-rail adapter 35 (accessory).

Straight routing cuts are to be carried out with

help of the guide rail 42 (accessory).

For this, always use the base spacer 41 (acces-

sory) to compensate the height difference.

Mount the guide-rail adapter 35 with the guide

rods 31.

Place the guide rail on the workpiece and mount

with a suitable clamping device (e. g. screw

clamp).

Place the router with guide-rail adapter 35 on the

guide rail.

■ Before any work on the machine itself, pull

the mains plug.

■ For safe and proper working, always keep

the machine and the ventilation slots clean.

If the machine should fail despite the care taken

in manufacturing and testing procedures, repair

should be carried out by an after-sales service

centre for Bosch power tools.

In all correspondence and spare parts orders,

please always include the 10-digit order number

given on the nameplate of the machine.

WARNING! Important instructions for con-

necting a new 3-pin plug to the 2-wire cable.

The wires in the cable are coloured according to

the following code:

Do not

connect the blue or brown wire to the

earth terminal of the plug.

Important: If for any reason the moulded plug is

removed from the cable of this machine, it must

be disposed of safely.

G H

I K

Maintenance and Cleaning

strain relief

live = brown

neutral = blue

To be fitted

by qualified

professional only

1 609 929 F23 - Buch Seite 6 Montag, 19. April 2004 8:27 08

18 • 1 609 929 F23 • 04.04

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Bosch POF1300ACE in the language / languages: English, German, Dutch, Danish, French, Italian, Portuguese, Swedish, Turkish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 3,95 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Bosch POF1300ACE

Bosch POF1300ACE User Manual - English, French, Spanish - 99 pages

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Bosch POF1300ACE Manual

Product: