Manual Bosch POF1100AE (page 14 of 99) (English, German, Dutch, Danish, French, Italian, Portuguese, Swedish, Turkish, Spanish, Norwegian, Finnish)

23201

Zoom out

Zoom in

1/99

English - 2

The machine is intended for routing grooves,

edges, profiles and elongated holes as well as

copy routing in wood, plastic and light building

materials, while resting firmly on the workpiece.

With reduced speed and with appropriate routing

bits, non-ferrous alloys can also be machined.

Working safely with this ma-

chine is possible only when the

operating and safety information

are read completely and the in-

structions contained therein are

strictly followed. In addition, the

general safety notes in the enclosed booklet

must be observed. Before using for the first

time, ask for a practical demonstration.

■ Wear protective glasses and hearing protec-

tion.

■ Wear sturdy shoes.

■ For long hair, wear hair protection. Work only

with closely fitting clothes.

■ If the mains cable is damaged or cut through

while working, do not touch the cable but im-

mediately pull the mains plug. Never use the

machine with a damaged cable.

■ Connect machines that are used in the open

via a residual current device (RCD) with an ac-

tuating current of 30 mA maximum. Do not op-

erate the machine in rain or moisture.

■ Always direct the cable to the rear away from

the machine.

■ Use appropriate detectors to determine if

utility lines are hidden in the work area or

call the local utility company for assist-

ance.

Contact with electric lines can lead to fire and

electric shock. Damaging a gas line can lead

to explosion. Penetrating a water line causes

property damage or may cause an electric

shock.

■ Hold the power tool only by the insulated

gripping surfaces, when performing an op-

eration where the cutting tool may run into

hidden wiring or its own cord.

Contact with a “live” wire will make exposed

metal parts of the tool “live” and shock the op-

erator.

■ When working with the machine, always hold it

firmly with both hands and provide for a secure

stance.

■ Secure the workpiece. A workpiece clamped

with clamping devices or in a vice is held more

secure than by hand.

■ Apply the machine to the workpiece only when

switched on.

■ Before putting into operation, check the routing

tool for firm seating.

■ Never route over metal objects such as nails or

screws.

■ Keep hands away from rotating router bit.

■ After finishing work, guide the machine back

into the upper starting position by actuating the

clamping lever and switch the machine off.

■ Always switch the machine off and wait until it

has come to a standstill before placing it down.

■ Protect tools from impact and shock.

■ Never allow children to use the machine.

■ Bosch is only able to ensure perfect operation

of the machine if the original accessories in-

tended for it are used.

Router Bit Selection

Depending on processing and application, router

bits are available in the most different designs

and qualities:

Router bits made of high speed steel (HSS)

are suitable for the machining of soft materials,

e. g. soft wood and plastic.

Carbide tipped router bits (HM) are particularly

suitable for hard and abrasive materials, e. g.

hard wood and aluminium.

Use only routing tools with an allowable

speed matching at least the highest no-

load speed of the machine.

The shank diameter of the router bit

must correspond with the rated diame-

ter of the tool holder (collet).

Original router bits from the extensive Bosch ac-

cessories program are available at your specialist

shop.

Intended Use

For Your Safety

Inserting a Router Bit

1 609 929 F23 - Buch Seite 2 Montag, 19. April 2004 8:27 08

14 • 1 609 929 F23 • 04.04

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Bosch POF1100AE in the language / languages: English, German, Dutch, Danish, French, Italian, Portuguese, Swedish, Turkish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 3,95 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Bosch POF1100AE

Bosch POF1100AE User Manual - English, French, Spanish - 99 pages

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Bosch POF1100AE Manual

Product: