Manual Bosch PMF 220 CE - Multitool (page 20 of 120) (English, German, Dutch, Danish, French, Italian, Portuguese, Swedish, Turkish, Spanish, Norwegian, Finnish)

635572

Zoom out

Zoom in

1/120

20 | English

1 609 92A 1G1 | (30.11.15) Bosch Power Tools

Mounting/Replacing a Sanding Sheet on the

Sanding Plate

The sanding plate 10 is fitted with Velcro backing for quick

and easy fastening of sanding sheets with Velcro adhesion.

Before attaching the sanding sheet 11, free the Velcro back-

ing of the sanding plate 10 from any debris by tapping against

it in order to enable optimum adhesion.

Position the sanding sheet 11 flush alongside one edge of the

sanding plate 10, then lay the sanding sheet onto the sanding

plate and press firmly.

To ensure optimum dust extraction, pay attention that the

punched holes in the sanding sheet match with the holes in

the sanding plate.

To remove the sanding sheet 11, grasp it at one of the tips and

pull it off from the sanding plate 10.

You can use all sanding sheets, fleece pads/polishing cloth

pads of the Delta 93 mm series of Bosch accessory program.

Sanding accessories, such as fleece pads/polishing cloth

pads, are attached to the sanding plate in the same manner.

Selecting the Sanding Sheet

Depending on the material to be worked and the required rate of material removal, different sanding sheets are available:

Dust/Chip Extraction

 Dust from materials such as lead-containing coatings,

some wood types, minerals and metal can be harmful to

one’s health. Touching or breathing-in the dust can cause

allergic reactions and/or lead to respiratory infections of

the user or bystanders.

Certain dust, such as oak or beech dust, is considered car-

cinogenic, especially in connection with wood-treatment

additives (chromate, wood preservative). Materials con-

taining asbestos may only be worked by specialists.

– As far as possible, use a dust extraction system suitable

for the material.

– Provide for good ventilation of the working place.

– It is recommended to wear a P2 filter-class respirator.

Observe the relevant regulations in your country for the

materials to be worked.

 Prevent dust accumulation at the workplace. Dust can

easily ignite.

Connecting the Dust Extraction

The dust extraction 17 is intended only when working with the

sanding plate 10; it is not of use in combination with other ap-

plication tools.

For sanding, always connect the dust extraction.

To mount the dust extraction 17 (accessory), remove the ap-

plication tool and the depth stop 12.

Slide the dust extraction 17 all the way over the tool holder 6

onto the collar of the power tool. Turn the dust extraction to

the required position (not directly under the power tool).

Press shut the clamping lever 16 to fix the dust extraction.

Plug the tool sleeve of the vacuum hose 14 onto the vacuum

connection 15. Connect the vacuum hose 14 to a vacuum

cleaner (accessory).

An overview for connecting to various vacuum cleaners can be

found on the graphics page.

The vacuum cleaner must be suitable for the material being

worked.

When vacuuming dry dust that is especially detrimental to

health or carcinogenic, use a special vacuum cleaner.

Operation

Starting Operation

 Observe the mains voltage! The voltage of the power

source must correspond with the data on the type plate of

the machine.

Sanding disc Material Application Grain size

Red quality

– All wooden materials

(e.g., hardwood, soft-

wood, chipboard, build-

ing board)

–Metal materials

For coarse-sanding, e. g. of rough, unplaned beams and

boards

coarse 40

For face sanding and planing small irregularities medium 80

100

120

For finish and fine sanding of wood

fine 180

240

320

400

White quality

–Paint

–Varnish

–Filling compound

–Filler

For sanding off paint

coarse 40

For sanding primer (e.g., for removing brush dashes,

drops of paint and paint run)

medium 80

100

120

For final sanding of primers before coating

fine 180

240

320

OBJ_BUCH-2650-002.book Page 20 Monday, November 30, 2015 8:42 AM

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Bosch PMF 220 CE - Multitool in the language / languages: English, German, Dutch, Danish, French, Italian, Portuguese, Swedish, Turkish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 8,66 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Bosch PMF 220 CE - Multitool Manual

Product: