635572

Bosch PMF 220 CE - Multitool Manual

16
Zoom out
Zoom in
Previous page
1/120
Next page
16 | English
1 609 92A 1G1 | (30.11.15) Bosch Power Tools
The severed plug must be disposed of to avoid a possible
shock hazard and should never be inserted into a mains
socket elsewhere.
Products sold in AUS and NZ only: Use a residual current
device (RCD) with a rated residual current of 30 mA or
less.
Product Description and
Specifications
Read all safety warnings and all instruc-
tions. Failure to follow the warnings and in-
structions may result in electric shock, fire
and/or serious injury.
Intended Use
The machine is intended for sawing and cutting wooden mate-
rials, plastic, gypsum, non-ferrous metals and fastening ele-
ments (e.g. nails, staples). It is also suitable for working soft
wall tiles as well as for dry sanding and scraping of small sur-
faces. It is especially suitable for working close to edges and
for flush cutting.
Product Features
The numbering of the product features refers to the illustra-
tion of the machine on the graphics page.
1 On/Off switch
2 Thumbwheel for orbit frequency preselection
3 Venting slots
4 Thread for auxiliary handle
5 Handle (insulated gripping surface)
6 Tool holder
7 Plunge saw blade
8 Clamping bolt
9 Hex key
10 Sanding plate
11 Sanding sheet
12 Depth stop
13 Segment saw blade
14 Vacuum hose*
15 Vacuum connection
16 Clamping lever of the dust extraction
17 Dust extraction*
18 Magnet
*Accessories shown or described are not part of the standard de-
livery scope of the product. A complete overview of accessories
can be found in our accessories program.
Technical Data
Noise/Vibration Information
Sound emission values determined according to
EN 60745-2-4.
Typically the A-weighted noise levels of the product are:
Sound pressure level 84 dB(A); Sound power level 95 dB(A).
Uncertainty K=3 dB.
Wear hearing protection!
Working without auxiliary handle
Vibration total values a
h
(triax vector sum) and uncertainty K
determined according to EN 60745-2-4:
Sanding: a
h
=10m/s
2
, K=1.5 m/s
2
Sawing with plunge cut saw blade: a
h
=16m/s
2
, K=2 m/s
2
Sawing with segment saw blade: a
h
=14m/s
2
, K=3 m/s
2
Scraping: a
h
=12m/s
2
, K=1.5 m/s
2
.
Working with auxiliary handle
Vibration total values a
h
(triax vector sum) and uncertainty K
determined according to EN 60745-2-4:
Sanding: a
h
=9m/s
2
, K=1.5 m/s
2
Sawing with plunge cut saw blade: a
h
=17m/s
2
, K=2 m/s
2
Sawing with segment saw blade: a
h
=18.5m/s
2
, K=3 m/s
2
Scraping: a
h
=16m/s
2
, K=1.5 m/s
2
.
The vibration level given in this information sheet has been
measured in accordance with a standardised test given in
EN 60745 and may be used to compare one tool with another.
It may be used for a preliminary assessment of exposure.
The declared vibration emission level represents the main appli-
cations of the tool. However if the tool is used for different appli-
cations, with different accessories or insertion tools or is poorly
maintained, the vibration emission may differ. This may signifi-
cantly increase the exposure level over the total working period.
An estimation of the level of exposure to vibration should also
take into account the times when the tool is switched off or
when it is running but not actually doing the job. This may signif-
icantly reduce the exposure level over the total working period.
Identify additional safety measures to protect the operator from
the effects of vibration such as: maintain the tool and the acces-
sories, keep the hands warm, organisation of work patterns.
Multi-function tool PMF 220 CE
Article number
3 603 A02 0..
Preselection of orbital
stroke rate
Constant electronic control
Soft starting
Rated power input
W220
Output power
W130
No-load speed n
0
min
-1
15000–20000
Oscillation angle, left/right
°1.4
Weight according to
EPTA-Procedure 01:2014
kg 1.1
Protection class
/II
The values given are valid for a nominal voltage [U] of 230 V. For differ-
ent voltages and models for specific countries, these values can vary.
OBJ_BUCH-2650-002.book Page 16 Monday, November 30, 2015 8:42 AM
… 16 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Bosch PMF 220 CE - Multitool at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Bosch PMF 220 CE - Multitool in the language / languages: English, German, Dutch, Danish, French, Italian, Portuguese, Swedish, Turkish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 8,66 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info