508454
14
Zoom out
Zoom in
Previous page
1/90
Next page
14 | English
2 609 005 779 | (21.2.12) Bosch Power Tools
Technical file (2006/42/EC) at:
Robert Bosch GmbH, PT/ETM9,
D-70745 Leinfelden-Echterdingen
Robert Bosch GmbH, Power Tools Division
D-70745 Leinfelden-Echterdingen
Leinfelden, 30.01.2012
Assembly
Changing the Tool
f Before any work on the machine itself, pull the mains
plug.
f Wear protective gloves when changing application
tools/accessories. Contact with the application tool/acces-
soriy can lead to injuries.
Selecting the Application Tool/Accessory
The following table shows examples for application tools. Further application tools can be found in the extensive Bosch acces-
sories program.
Dr. Egbert Schneider
Senior Vice President
Engineering
Dr. Eckerhard Strötgen
Engineering Director
PT/ESI
Accessory Material Application
BIM segment saw
blade
Wooden materials, plas-
tic, non-ferrous metals
Separating and plunge cuts; also for sawing close to edges,
in corners and hard to reach areas;
example: shortening already installed bottom rails or door
hinges, plunge cuts for adjusting floor panels
Base plate for sand-
ing, series Delta
93 mm
Depends on sanding sheet Sanding surfaces close to edges, in corners or hard to reach
areas;
depending on the sanding sheet for, e.g., sanding wood,
paint, varnish, stone
HCS plunge cut saw
blade, wood
Wooden materials, soft
plastics
Separating and deep plunge cuts; also for sawing close to
edges, in corners and hard to reach areas;
example: narrow plunge cut in solid wood for installing a
ventilation grid
HCS plunge cut saw
blades, wood
Wooden materials, soft
plastics
Smaller separating and plunge cuts;
example: cut-outs in furniture for cable connections
BIM plunge cut saw
blades, metal
Metal (e.g. unhardened
nails, screws, smaller pro-
files), non-ferrous metals
Smaller separating and plunge cuts;
example: shortening narrow profiles, cutting fastening
elements such as staples
HM-Riff segment
saw blade
Grouting joints, soft wall
tiles, glass-fibre reinforces
plastic and other abrasive
materials
Cutting and separating close to edges, in corners or hard to
reach areas;
example: removing grouting joints between wall tiles for
repair work, cutting openings in tiles, gypsum boards or
plastic
HM-Riff delta plate
Mortar, concrete remain-
ders, wood, abrasive
materials
Rasping and sanding on hard surfaces;
example: removing mortar or tile adhesive (e.g. when
replacing damaged tiles)
Scraper, rigid
Carpets, coverings Scraping on hard surfaces;
example: removing carpet and tile adhesive
BIM serrated seg-
ment saw blade
Insulation material, insula-
tion panels, floor panels,
sound insulation panels,
cardboard, carpet, rubber,
leather
Cutting soft materials
OBJ_BUCH-345-008.book Page 14 Tuesday, February 21, 2012 1:35 PM
14


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Bosch PMF 190 E at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Bosch PMF 190 E in the language / languages: English, German, Dutch, Danish, French, Italian, Portuguese, Swedish, Turkish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 10,24 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info