Manual Bosch PMF 10.8 LI (page 17 of 117) (English, German, Dutch, Danish, French, Italian, Portuguese, Swedish, Turkish, Spanish, Norwegian, Finnish)

591462

Zoom out

Zoom in

1/117

English | 17

Bosch Power Tools 1 609 92A 0SE | (30.10.14)

Mounting/Replacing the Application Tool/Accessory

If required, remove an already mounted application tool/

accessory.

For removing the application tool/accessory loosen the screw

10 with the hex key 11 and remove the tool.

Mount the application tool/accessory (e.g. plunge cut saw

blade 9) in such a way on the tool holder 7 that the openings

of the tool engage into the cams of the tool holder.

For a safe and fatigue-free working position it is possible to

position the application tools/accessories in any snap-in posi-

tions on the tool holder. Position the tool in such a way that

the depressed centre points downwards (marking on the tool

is readable from above, see figure on the graphics page).

Use the screw 10 to fasten the application tool/accessory.

Tightly fasten the screw 10 with the hex key 11.

 Check the tight seating of the application tool/accesso-

ry. Incorrect or not securely fastened application tools/ac-

cessories can come loose during operation and pose a haz-

ard.

Mounting/Replacing a Sanding Sheet on the Sanding

Plate

The sanding plate 12 is fitted with Velcro backing for quick

and easy fastening of sanding sheets with Velcro adhesion.

Before attaching the sanding sheet 13, free the Velcro back-

ing of the sanding plate 12 from any debris by tapping against

it in order to enable optimum adhesion.

Position the sanding sheet 13 flush alongside one edge of the

sanding plate 12, then lay the sanding sheet onto the sanding

plate and press firmly.

To ensure optimum dust extraction, pay attention that the

punched holes in the sanding sheet match with the holes in

the sanding plate.

To remove the sanding sheet 13, grasp it at one of the tips and

pull it off from the sanding plate 12.

You can use all sanding sheets, fleece pads/polishing cloth

pads of the Delta 93 mm series of Bosch accessory program.

Sanding accessories, such as fleece pads/polishing cloth

pads, are attached to the sanding plate in the same manner.

HM-Riff segment

saw blade

Grouting joints, soft wall

tiles, glass-fibre reinforces

plastic and other abrasive

materials

Cutting and separating close to edges, in corners or hard to

reach areas;

example: removing grouting joints between wall tiles for

repair work, cutting openings in tiles, gypsum boards or

plastic

HM-Riff delta plate

Mortar, concrete remain-

ders, wood, abrasive ma-

terials

Rasping and sanding on hard surfaces;

example: removing mortar or tile adhesive (e.g. when

replacing damaged tiles)

HM-Riff grout and

mortar remover

Mortar, grouting joints,

epoxy resin, glass-fibre re-

inforces plastic and other

abrasive materials

Removing grouting joints from wall and floor tiles as well as

removing mortar and joint adhesive (also in right-angled

corners)

Scraper, rigid

Carpets, coverings Scraping on hard surfaces;

example: removing carpet and tile adhesive

BIM serrated seg-

ment saw blade

Insulation material, insula-

tion panels, floor panels,

sound insulation panels,

cardboard, carpet, rub-

ber, leather

Cutting soft materials

Accessory Material Application

OBJ_BUCH-1170-005.book Page 17 Thursday, October 30, 2014 8:12 AM

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Bosch PMF 10.8 LI in the language / languages: English, German, Dutch, Danish, French, Italian, Portuguese, Swedish, Turkish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 8,8 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Bosch PMF 10.8 LI Manual

Product: